UPSC, EXAM ON 12th to 14th MAY,SYLLABUS,COMBINED GEO-SCIENTIST, GEOLOGIST EXAMINATION, 2017

COMBINED GEO-SCIENTIST AND GEOLOGIST EXAMINATION, 2017 

The Combined Geo-Scientist and Geologist Examination-2017 will be held on 12.05.2017, 13.05.2017 and 14.05.2017. Examination on 12th & 13th May, 2017 will be held in two sessions and each session will be of three hours duration. On 14.05.2017 there is only one session in the morning i.e. 9.00 A.M. to 12.00 Noon.  

The examination shall be conducted according to the following Plan : 

Part I. - Written examination in the subjects as set out in para 2 below. 

Part II. - Interview/ Personality Test of such candidates as may be called by the Commission, carrying a maximum of 200 marks. 

2. The following will be the subjects for the written examination, for selection to the post of Geologist, Geophysicist and Chemist Group 'A' in GSI and Junior Hydro-geologist (Scientist 'B'), Group 'A' for Central Ground Water Board. Subject Duration Maximum Marks (1) (2) (3) 1. General English (common for all category) 3 hrs 100 Category - 1 For the post of Geologist 2. Geology Paper I 3 hrs 200 

3. Geology Paper II: 3 hrs 200 

4. Geology Paper III: 3 hrs 200 Category - 2 For the post of Geophysicist 2. Geophysics Paper I: 3 hrs 200 3. Geophysics Paper II: 3 hrs 200 4. Geophysics Paper III: 3 hrs 200 Category - 3 

For the post of Chemist 2. Chemistry Pap er I: 3 hrs 200 3. Chemistry Paper II: 3 hrs 200 4. Chemistry Paper III: 3 hrs 200 Category - 4 For the Post of Jr. Hydro geologist 2. Geology Pap er I 3 hrs 200 3. Geology Paper II 3 hrs 200 4. Hydrogeology 3 hrs 200 

Note I: Candidates competing for selection to the posts of Geologist, Geophysicist, Chemist and Junior Hydro geologist will be required to appear in all the subjects mentioned against respective category above. Note II: Candidates competing for selection for both the posts of Geologist and Jr. Hydro geologist will be required to appear in all the subjects mentioned against Categories 1 and 4 above. Note III : If any candidate failed to appear in any one or more of above papers, meant for written examination for selection to the post of Geologist, Geophysicist, Chemist, their candidature shall stand rejected and part of written examination appeared by him/her shall not be evaluated and counted for any purpose.

  THE EXAMINATION IN ALL THE SUBJECTS WILL BE OF CONVENTIONAL (ESSAY) TYPE. 

.All Question papers must be answered in English. The Question Papers will be set in English only. 

.The standard and syllabus of the examination will be as shown in the Schedule. 

. Candidates must write the papers in their own hand. In no circumstances they will be allowed the help of scribe to write answers for them. However, blind candidates and the candidates with locomotor disability and cerebral palsy where dominant ( writing) extremity is affected to the extent of slowing the performance of function (minimum of 40% impairment) will be allowed to write Combined Geo-Scientist and Geologist Examination with the help of a scribe Compensatory time of twenty minutes per hour shall be permitted for the Blind candidates and the candidates with locomotor disability and cerebral palsy where dominant (writing extremity is affected to the extent of slowing the performance of function (minimum of 40% impairment) will also be allowed in the Combined Geo-Scientist and Geologist Examination.

 The Commission have discretion to fix qualifying marks in any or all the subjects of the examination. 

. If a candidate's handwriting is not easily legible, deduction will be made on this account from the total marks otherwise accruing to him/her.

  Marks will not be allotted for mere superficial knowledge.

 10. Credit will be given for orderly, effective and exact expression combined with due economy of words in all subjects of the examination. 


. In the question papers wherever necessary, questions involving the Metric System of Weights and Measures only will be set.

Candidates should use only International form of Indian numerals (e.g. 1, 2, 3, 4, 5, 6 etc) while answering question papers. 13. Candidates are permitted to bring and use battery operated pocket calculators for answering papers in this examination. Loaning or inter-changing of calculators in the Examination Hall is not permitted. Interview/Personality Test : The candidate will be interviewed by a Board of competent and unbiased observers who will have before them a record of his/ her career. The object of the interview is to assess his/her suitability for the posts for which he/she has competed. Special attention will be paid in the Personality Test to assessing the candidate's capacity for leadership, initiative and intellectual curiosity, tact and other social qualities, mental and physical energy, powers of practical application, integrity of character and aptitude for adapting themselves to the field life. 

SCHEDULE STANDARD AND SYLLABUS 

A paper in General English is compulsory and common for all the four categories and its standard will be such as may be expected of a science graduate. 3 compulsory papers each on Geology Geophysics, Chemistry and Hydrogeology subjects will be approximately of the M.Sc. degree standard of an Indian University and questions will generally be set to test the candidate's grasp of the fundamentals in each subject. There will be no practical examination in any of the subjects. 

GENERAL ENGLISH : 100 Marks Candidate will be required to write a short Essay in English. Other questions will be designed to test their understanding of English and workmanlike use of words. 

GE OLOGY - PAPER I : 200 Marks Section A : Geomorphology and Remote Sensing. Introduction : Development, Scope, Geomorphic concepts, Types and Tools; Landforms: Role of Lithology, peneplaination, endogenous and exogenous forces responsible, climatic and Tectonic factors and rejuvenation of landforms; Denudational processes : Weathering , erosion, transportation, weathering products and soils – profiles, types, duricrusts; Hillslopes : Their characteristics and development, fluvial processes on hillslopes; River and drainage basin: Drainage pattern, network characteristics, Valleys and their development, processes of river erosion, transportation and deposition; Landforms produced by geomorphic agents: Fluvial, Coastal , Glacial and Aeolian landforms; Geomorphic indicators of neotectonic movements : Stream channel morphology changes , drainage modifications, fault reactivation, Uplift – subsidence pattern in coastal areas; Applied Geomorphology : Application in various fields of earth sciences viz. Mineral prospecting, Geohydrology, Civil Engineering and Environmental studies; Geomorphology of India: Geomorphical features and zones Electromagnetic radiation – characteristics, remote sensing regions and bands; General orbital and sensor characteristics of remote sensing satellites; Spectra of common natural objects – soil, rock, water and vegetation. Aerial photos – types, scale, resolution, properties of aerial photos, stereoscopic parallax, relief displacement; Principles of photogrammetry; Digital image processing - characteristics of remote sensing data, preprocessing, enhancements, classification; Elements of photo and imagery pattern and interpretation, application in Geology; Remote sensing applications in interpreting structure and tectonics, Lithological mapping, mineral resources, natural hazards and disaster mitigation, groundwater potentials and environmental monitoring. Landsat, Skylab, Seasat and other foreign systems of satellites and their interpretation for geological and other studies; Space research in India – Bhaskara and IRS systems and their applications, Thermal IR remote sensing and its applications, Microwave remote sensing and its applications. Principles and components of Geographic Information System (GIS), remote sensing data integration with GIS, applications of GIS in various geological studies. Section B: Structural Geology Principle of geological mapping and map reading, projection diagrams. Stress-strain relationships for elastic, plastic and viscous materials. Measurement of strain in deformed rocks. Behaviour of minerals and rocks under deformation conditions. Structural analysis of folds, cleavages, lineations, joints and faults. Superposed deformation. Mechanism of folding, faulting and progressive deformation. Shear Zones: Brittle and ductile shear zones, geometry and products of shear zones; Mylonites and cataclasites, their origin and significance.Time relationship between crystallization and deformation. Unconformities and basement-cover relations. Structural behaviour of igneous plutons, diapirs and salt domes. Introduction to petrofabric analysis. Section C: Geodynamics Earth and its internal structure. Continental drift – geological and geophysical evidence and objections. An overview of plate tectonics including elementary concepts of plates, lithosphere, asthenosphere, types of plate boundaries and associated important geological features like oceanic trenches, volcanic arcs, accretionary wedges, topography of mid-ocean ridges, magnetic anomaly stripes and transform faults. Gravity anomalies at mid-ocean ridges, deep sea trenches, continental shield areas and mountain chains. Palaeomagnetism and its application for determining palaeoposition of continents. Isostasy, Orogeny and Epeirogeny. Seismic belts of the earth. Seismiciy at plate boundaries. Principles of Geodesy, Global Positioning System (GPS) and its application in crustal motion monitoring including neotectonics. Palaeoposition of India and Geodynamics of the Indian plate. Section D: Stratigraphy Principles of Statigraphy : History and Development of Statigraphy; Stratigraphic procedures (Surface and Subsurface); Concept of Lithofacies and Biofacies; Stratigraphic Correlation (Litho, Bio- and Chronostrarigraphic Correlation); Study of standard stratigraphic code (Lithostratigraphic, Biostratigraphic and Chronostratigraphic); Concepts of Magnetostratigraphy, Chemostratigraphy, Event stratigraphy, and Sequence stratigraphy; Nomenclature and the modern stratigraphic code. Radioisotopes and measuring geological time. Geological time-scale. Stratigraphic procedures of correlation of unfossiliferous rocks. Precambrian stratigraphy of India : Achaean stratigraphy -tectonic frame-work, geological history and evolution of Dharwar, and their equivalents; Easterghats mobile belt; Proterozoic stratigraphy -tectonic framework, geological history and evolution of Cuddapahs and their equivalents. Palaeozoic stratigraphy: Palaeozoic formations of India with special reference to type localities, history of sedimentation, fossil content. Mesozoic stratigraphy: Mesozoic formations of India with special reference to type localities, history of sedimentation, fossil content. Cenozoic stratigraphy: Cenozoic formations of India, Rise of the Himalayas and evolution of Siwalik basin. Stratigraphic boundaries: Stratigraphic boundary problems in Indian geology. Gondwana Supergroup and Gondwanaland. Deccan Volcanics. Quaternary stratigraphy. Rocks record, palaeoclimates and palaeogeography. Section E : Palaeontology Evolution of the fossil record and the geological time scale. Basic and functional morphology of major fossil groups. Species concept; Major evolutionary theories ; Techniques in Palaeontology mega fossils- microfossils – nannofossils , ichnofossils – collection, identification and illustration – binomial Nomenclature; Invertebrate Palaeontology – A brief study of morphology, classification, evolutionary trends and distribution of Bivalves, cephalopoda and Gastropods, Echinoids, Corals and Brachiopods. Vertebrate Palaeontology – Brief study of vertebrate life through ages. Evolution of reptiles and mammals; Siwalik vertebrate fauna; Biodiversity and mass extinction events; evidence of life in Precambrian times; Palaeontological perspective : Use of palaeontological data in a) Stratigraphy b) Palaeoecology and evolution; Introduction to Micropalaeontology; Types of Microfossils; Plant fossils: Gondwana flora and their significance. Different microfossil groups and their distribution in India; Application of palynology. Basic idea about statistical application in palaeontology. Fundamentals of isotopic studies of fossils. GEOLOGY – PAPER II : 200 Marks Section A : Mineralogy and Geochemistry & Isotope Geology External symmetry of crystals: Symmetry Elements, methods of projection, derivation of 32 classes, Hermaun Muguin notation. Internal symmetry of crystals: Derivation of 230 space groups, diffraction of crystals by X-rays, Braggs’ law. Principles of optical mineralogy : Optical mineralogy, polarized light, behaviour of isotropic and anisotropic minerals in polarized light, refractive index, double refraction, birefringence, sign of elongation, interference figures, 2V, dispersion in minerals. Optic sign, pleochroic scheme and determination of fast and slow vibrations and accessory plates. Introduction to mineralogy: Definition and classification of minerals. Structural and chemical principles of crystals / minerals, chemical bonds, ionic radii, coordination number (CN) and polyhedron. Structure, chemistry, physical and optical characters and paragenesis of mineral groups: Olivine, pyroxene, amphibole, mica and spinel groups; Feldspar, quartz, feldspathoid, aluminum silicate, epidote and garnet groups. Accessory minerals: Apatite, calcite, corundum, scapolite, sphene and zircon. Earth mineralogy: Average mineralogical composition of crust and mantle, mineral transformations in the mantle with depth. Earth in relation to the solar system and universe, cosmic abundance of elements. Composition of the planets and meteorites. Structure and composition of earth and distribution of elements. Trace elements and REE and their importance in fractional crystallization during magmatic / partial melting. Elementary crystal chemistry and thermodynamics. Introduction to isotope geochemistry. Geochronology and age of the Earth: Law of Radioactivity; Principles of isotopic dating, Decay schemes and Derivation of equation of age. Rb/Sr, U- Th –Pb methods of dating the rocks. Age of the Earth. Geochemistry and principles of evolution of hydrosphere, biosphere and atmosphere. Geochemical cycle and principles of geochemical prospecting. Section B : Igneous Petrology Origin of magmas: Mantle, onset of partial melting of mantle, processes of partial melting in mantle, mantle-magmas in relation to degree and depth-level of partial melting. Phase equilibrium in igneous systems: Binary and ternary systems. Bowen's reaction principle: Reaction series and its application to petrogenesis. Magmatic evolution and differentiation: Fractional crystallization, gravitational differentiation, gas streaming, liquid immiscibility and assimilation. Structures and textures: Definition, description, rock examples and genetic implications of common structures and textures of igneous rocks. Classification of igneous rocks: Mode, CIPW norm, IUGS and other standard classifications; Magmatism and tectonics: Inter-relationship between tectonic settings and igneous rock suites. Igneous rock suites: Form, structure, texture, modal mineralogy, petrogenesis and distribution of Ultramafic rocks: Dunite-peridotite-pyroxenite suite; kimberlites, lamprophyres, lamproites, komatiites; Basic rocks: Gabbro-norite-anorthosite-troctolite suite, Dolerites; Basalts and related rocks; Intermediate rocks: Diorite-monzonite-syenite suite; Andesites and related rocks; Acidic rocks: Granite-syenite-granodiorite-tonalite suite; Rhyolites and related rocks; Alkaline rocks: Shonkinite, ijolite, urtite, melteigite, malignite, alkali gabbros, alkali basalt, alkali granite, alkali syenite, nepheline syenite and phonolite; Carbonatites; Ophiolite suite. Petrogenetic provinces : Continental areas: Volcanic-Flood basalts-Tholeiites (Deccan Trap, Columbia River basalts); Layered gabbroic intrusions: The Bushveld complex, Skaergaard intrusion, Still water complex. Plutonic: Carbonatites and alkaline rock complexes of India; Oceanic Rift valleys: MORB- Tholeiites-Ophiolites Section C : Metamorphic Petrology & Processes Concepts and Theory: Types of Metamorphism and their controlling factors; Common minerals of metamorphic rocks; Field observations, petrographic classification of common metamorphic rocks; Metamorphic facies and facies series. Effects of Metamorphism : Phase diagrams and graphic representation of mineral assemblages; Prograde and retrograde metamorphism, Matasomatism; Deformation textures and textures related to recrystallization; Metamorphic reactions, elemental exchange and Pressure – Temperature conditions of Isograds; Mineral assemblages equilibrium reaction textures and geo-thermo barometry. Experimental and thermodynamic appraisal of metamorphic reactions; Role of fluids in metamorphic reactions. Metamorphism types and products: Regional and thermal metamorphism of pelitic rocks. Regional and thermal metamorphism of basic and ultrabasic rocks; Regional and thermal metamorphism of impure, silicious carbonate rocks; Metamorphism of Granitoides, Charnockites and Migmatites. Metamorphism in space and time: Plate tectonics and metamorphic processes; Paired metamorphic belts, Archaean and Proterozoic terrains; Extraterrestrial Metamorphism (Impact and Shock Metamorphism); polymetamorphism Section D : Sedimentology (1) Provenance and diagenesis of sediments. Sedimentary textures. Framework, matrix and cement of terrigenous sediments. Definition, measurement and interpretation of grain size. Elements of hydraulics. Primary structures, palaeocurrent analysis. Biogenic and chemical sedimentary structures. Sedimentary environment and facies. Facies modeling for marine, nonmarine and mixed sediments. Tectonics and sedimentation. Classification and definition of sedimentary basins. Sedimentary basins of India. Cyclic sediments. Seismic and sequence stratigraphy. Purpose and scope of basin analysis. Stratum contours and isopach maps. Section E : Environmental Geology and Natural Hazards Fundamental concepts of Environmental Geology - it’s scope, objectives, and aims. Earth’s thermal environment and Climates. Global warming. Green house effect. Ozone depletion–Ice sheets and fluctuation in sea levels. Concepts of ecosystem. Earth’s major ecosystems terrestrial and aquatic. Meteorology as environmental science. Air Pollution, sources of pollution, pollution due to dust and waste disposal. National and International standards. Environmental health hazards. Mining, opencast, underground, disposal of industrial and radio-active waste, dumping stacking, rehandling, management, mineral processing, tailing ponds, acid mine drainage, siltation, case studies. Mining below water table, mine water discharges, regional effects on water regime. Noise levels- national standards, mining machinery, ill effects. Air sampling techniques – respirable dust samplers, high volume air samplers, personal sampling pumps, weather monitoring equipments, automatic recorders. Elements of Environmental Impact Assessment – impacts, primary, secondary, prediction, assessment, base-line data generation, physical, biological, cultural, socioeconomic aspects. Carrying capacity based developmental planning – Assimilative capacity – supportive capacity – Resource based planning – Institutional strategies. Sustainable Developmental Planning - Applications of GIS in Environmental Management.Environmental Legislations in India. Concepts and principles: Natural hazards – preventive/ precautionary measures – floods, landslides, earthquakes, river and coastal erosion. Distribution, magnitude and intensity of earthquakes. Neotectonics and seismic hazard assessment. preparation of seismic hazard maps. Impact of seismic hazards on long and short term environmental conditions. Mechanism of landslides, causes of major floods, cyclones and storms. Deforestation and land degradation. Coastal erosion, its causes and control of Geological hazards and crisis management. 

GEOLOGY – PAPER III : 200 MARKS Section A: Indian mineral deposits and mineral economics Occurrence and distribution in India of metalliferous deposits - base metals, iron, manganese, aluminium, chromium, nickel, gold, silver, molybdenum. Indian deposits of non-metals – Diamond, mica, asbestos, barytes, gypsum, graphite, apatite and beryl. Gemstones, refractory minerals, abrasives and minerals used in glass, fertilizer, paint, ceramic and cement industries. Building stones. Phosphorite deposits. Placer deposits, rare earth minerals. Strategic, critical and essential minerals. India’s status in mineral production vis a vis world scenario, Changing patterns of mineral consumption. UNFC classification, National Mineral Policy. Mineral Concession Rules. Marine mineral resources and Laws of Sea. Section B: Ore genesis and Geophysics Ore deposits and ore minerals. Magmatic processes of mineralization. Porphyry, skarn and hydrothermal mineralization. Fluid inclusion studies. Mineralisation associated with – (i) ultramafic, mafic and acidic rocks (ii) greenstone belts (iii) komatiites, anorthosites and kimberlites and (iv) submarine volcanism. Magma related mineralization through geological time. Stratiform and stratabound ores. Ores and metamorphism – cause and effect relations. Metallogeny and mineral belts. Interrelationship between geology and geophysics - Role of geological and geophysical data in explaining geodynamical features of the earth. General and Exploration geophysics - Different types of geophysical methods; Gravity, magnetic, Electrical, Seismic - their principles and applications. Geophysical field operations - Different types of surveys, grid and route surveys, profiling and sounding techniques, scales of survey, presentation of geophysical data. Application of Geophysical methods - Regional geophysics, ore geophysics, engineering geophysics. Geophysical anomalies : correction to measured quantities, geophysical, anomaly, regional and residual (local) anomalies, factors controlling anomaly, depth of exploration. Integrated geophysical methods - Ambiguities in geophysical interpretation, Planning and execution of geophysical surveys. Section C: Mineral exploration Resource, reserve definitions; mineral resource in industries - historical perspective and present. A brief overview of classification of mineral deposits with respect to processes of formation in relation to exploration strategies. Principles of mineral prospecting and exploration - conceptualization, methodology and stages; sampling, subsurface sampling including pitting, trenching and drilling, core and non-core drilling, planning of bore holes and location of bore holes on ground. Core logging, geochemical exploration- nature of samples anomaly, strength of anomaly and controlling factors, coefficient of aqueous migration. Principles of reverse estimation, density and bulk density, factors affecting reliability of reserve estimation, reserve estimation based on geometrical models (square, rectangular, triangular and polygon blocks ) regular and irregular grid patterns, statistics and error estimation. Application of Geophysical techniques, Geomorphological and remote sensing techniques and Geobotanical and geochemical methods. Application of geostatistical techniques in Mineral Exploration. Section D: Geology of fuels Coal and its properties: Different varieties and ranks of coal. Origin of coal. Coalification process and its causes. Lithotypes, microlithotypes and macerals: their physical, chemical and optical properties. Maceral analysis of coal: Mineral and organic matter in coal. Petrographical methods and tools of examination. Fundamentals of coal petrology, concept of coal maturity, peat, lignite, bituminous and anthracite coal. Application of coal geology in hydrocarbon exploration. Applications of coal petrography. Proximate and ultimate analyses. Indian coal & lignite deposits. Industrial evaluation of coal characteristics with reference to coal classification. Geology and coal petrography of different coalfields of India. Uses of coal for various industries e.g. carbonization, liquefaction, power generation, gasification and coal-bed methane production. Origin, migration and entrapment of natural hydrocarbons. Characters of source and reservoir rocks. Structural, stratigraphic and mixed traps. Techniques of exploration. Geographical and geological distributions of onshore and offshore petroliferous basins of India. Mineralogy and geochemistry of radioactive minerals. Instrumental techniques of detection and measurement of radioactivity. Radioactive methods for prospecting and assaying of mineral deposits. Distribution of radioactive minerals in India. Radioactive methods in petroleum exploration – well logging techniques. Nuclear waste disposal – geological constraints. Section E : Engineering Geology Geological studies and evaluation in planning, design and construction of major civil structures. Elementary concepts of rock mechanics and soil mechanics. Site investigation, characterization and problems related to civil engineering projects: geological and geotechnical investigations for dams, reservoirs and spillways, tunnels, underground caverns, bridges, highways, shorelines. Problems of groundwater in engineering projects. Coastal geotechniques. Environmental considerations related to civil engineering projects. Resource evaluation of construction materials. Geological hazards (landslides and earthquakes), their significance, causes, preparedness and mitigation. Recent trends in geotechnical engineering. Geotechnical case studies of major projects in India. 

GEOPHYSICS - PAPER I: 200 Marks PART-A: 100 Marks a. Solid Earth Geophysics: Introduction to Geophysics its branches and relationship with other sciences. Solar system, its origin, characteristics of planetary members, Earth; its rotation and figure. Age of earth & various methods of determination. Tectonics and Geodynamics, Thermal history and its characteristics. Gravity field of earth and Isostasy. Geomagnetism, elements of earth's magnetism: Internal, External fields and their causes, Paleomagnetism, Polar wandering paths, Seafloor spreading, geophysical evidences. Elastic waves, internal structure of earth, variation of physical properties in the interior of earth. b. Earthquake and Engineering Seismology: Seismology, earthquakes, focal depth, epicenter, great Indian earthquakes, Intensity and Magnitude scales, Energy of earthquakes, foreshocks, aftershocks, Elastic rebound theory, Fault plane solutions, Seismicity and Seismotectonics of India, Frequency-Magnitude relation (b values), Velocity structure, VpNs studies. Elastic waves, their propagation characteristics. Seismic ray theory for spherically and horizontally stratified earth, basic principles of Seismic Tomography and receiver function analysis, Seismic network and arrays, telemetry systems, Earthquake prediction; dilatancy theory, short-term, middle-term and long- term predictions, Seismic microzonation studies, application for engineering problems, Seismometry, Principle of electromagnetic seismograph, displacement meters, velocity meter, accelerometer, WWSSN stations, Strong motion seismograph, seismic arrays for detection of nuclear explosions, Broadband seismometry. c. Mathematical methods in Geophysics: Properties of scalars, vectors and tensors, Elements of vector analysis, Gradient, Divergence and Curl, Gauss's divergence theorem, Stokes theorem, Definition of fields, Gravitational field, Newton's Law of gravitation, Gravitation potential and fields due to bodies of different geometric shapes, Electrostatic field, Coulomb's law, Electrical permittivity and dielectric constant, Basic guiding equations, Magneto static field, Origin of Magnetic field, Ampere's law, Biot and Savart's law, Geomagnetic fields, Magnetic fields due to different type of structures, Solution of Laplace equation in Cartesian Coordinate, Cylindrical Polar Coordinate and Spherical Polar Coordinate, Complex Variables in Potential theory, Green's theorem in Potential Theory. Concept of Image in Potential Theory, Analytical continuation in Potential fields, Numerical Methods in Potential Theory. Electrical fields in geophysics, point source, continuous distribution and double layers, equipotential and line of force. Current and potential in the earth, basic concept and equations of electromagnetic, Maxwell's equations, boundary conditions, elliptic polarization, electromagnetic potential and waves, radiation from dipoles, retarded potential, near and far fields, radiation resistance, EM field of a loops of wire on half space, multi-layered media, impedance and itsapplication. d.Geophysical Inversion: Fundamental concepts of inverse theory, Basic definition of inversions with application to Geophysics. Probability, Inverses with discrete and continuous models. Forward problems versus Inverse problems. Formulation of inverse problems and their relation to a matrix problem, linear inverse problems, classification of inverse problems, least square solutions and minimum norm solution, concept of norms, concept of 'a priori' information, constrained linear least square inversion, review of matrix theory Introduction to finite difference method, forward, backward and central difference mthod. Application of finite difference method for solving Helmholtz equation. Introduction to finite element method, various steps, simple examples showing application of finite element method. Models and data spaces, householder transformation, data resolution matrix, model resolution matrix, Eigen values and Eigen vectors, singular value decomposition (SVD), generalized inverses, Non-linear inverse problems, Gauss Newton method, steepest descent (gradient) method, Marquardt-Levenberg method, Earthquake location problem, tomography problem. Probabilistic approach of inverse problems, maximum likelihood and stochastic inverse methods, Backus-Gilbert method, Global optimization techniques, genetic algorithm, simulated annealing methods, examples of inverting geophysical data. PART-B: 100 Marks a. Mathematical Methods of Physics: Dimensional analysis, Vector algebra and vector calculus, Linear algebra, matrices, Cayley-Hamilton Theorem. Eigen values and eigenvectors. Linear ordinary differential equations of first & second order, Special functions (Hermite, Besse!, Laguerre and Legendre functions). Fourier series, Fourier and Laplace transforms. Elements of complex analysis, analytic functions; Taylor & Laurent series; poles, residues and evaluation of integrals. Elementary probability theory, random variables, binomial, Poisson and normal distributions. Central limit theorem. Green's function. Partial differential equations (Laplace, wave and heat equations in two and three dimensions). Elements of computational techniques: root of functions, interpolation, and extrapolation, integration by trapezoid and Simpson's rule, solution of first order differential equation using Runge-Kutta method. Finite difference methods. Tensors. Introductory group theory: SU (2), 0 (3). Complex Variables, Beta, Gamma functions and special functions, Laplace Transform & Fourier series, Fourier Transforms, Introductory methods of Numerical analysis. Operators and their properties. Thermodynamics and Statistical Physics: Laws of thermodynamics and their consequences; Thermodynamic potentials, Maxwell relations; Chemical potential, phase equilibria; Phase space, micro- and macrostates; Micro canonical, canonical and grandcanonical ensembles and partition functions; Free Energy and connection with thermodynamic quantities; First-and second-order phase transitions; Classical and quantum statistics, ideal Fermi and Bose gases; Principle of detailed balance; Blackbody radiation and Planck's distribution law; Bose-Einstein condensation; Random walk and Brownian motion; Introduction to non equilibrium processes; Diffusion equation. b.Electrodynamics: Gauss Theorem, Poison's equation, Laplace's equation, solution to Laplace's equation in Cartesian coordinates, spherical, cylindrical coordinates, use of Laplace's equation in the solutions of electrostatic problems. Ampere's circuital law, magnetic vector potential, displacement current, Faraday's law of electromagnetic induction. Maxwell's equations, differential and integral forms, physical significance of Maxwell's equations. Wave equation, plane electromagnetic waves in free space, in non conducting isotropic medium, in conducting medium, electromagnetic vector an scalar potentials, uniqueness of electromagnetic potentials and concept of gauge, Lorentz gauge, Columb gauge, charged particles in electric and magnetic fields, charged particles in uniform electric field, charged particle in homogeneous magnetic fields, charged particles in simultaneous electric and magnetic fields, charged particles in non homogeneous magnetic fields. Lienard - Wiechert potentials, electromagnetic fields from Lienard - Wiechert potentials of a moving charge, electromagnetic fields of a uniformly moving charge, radiation due to non-relativistic charges, radiation damping, Abrahama-Lorentz formula, Cherenkov radiation, radiation due to oscillatory electric dipole, radiation due to small current element. Condition for plasma existence, occurrence of plasma, magneto hydrodynamics, plasma waves. Transformation of electromagnetic potentials, Lorentz condition in covariant form, invariance or covariance of Maxwell field equations in terms of 4 vectors, electromagnetic field tensor, Lorentz transformation of electric and magnetic fields. c. Introductory Atmospheric and Space Physics: The Neutral atmosphere, atmospheric nomenclature, the Hydrostatic equation, geopotential height, expansion and contraction, fundamental forces in the atmosphere, apparent forces, atmospheric composition, solar radiation interaction with the neutral atmosphere, climate change. Electromagnetic radiation and propagation of Waves: EM Radiation, fundamentals of EM waves, effects of environment, Antennasbasic considerations, types of antennas. Propagation of Waves: ground wave, sky wave, and space wave propagation, troposcatter communication and extra terrestrial communication. The Ionosphere, morphology of ionosphere, the D, E and F-regions, chemistry of the ionosphere, ionospheric parameters, E and F region anomalies and irregularities in the ionosphere. Global Positioning Systems (GPS)-basic concepts, overview of GPS system, augmentation services, GPS system segment, GPS signal characteristics, GPS errors, multi path effects, GPS performance, satellite navigation system and applications. 

GEOPHYSICS - PAPER II : 200 Marks PART-A: 100 Marks a. Geophysical Potential Fields (Gravity and Magnetic) Geophysical potential fields, Inverse square law of field, Principles of Gravity and Magnetic methods, Geoid, Spheroid, Nature of gravity and its variation, Properties of Newtonian potential, Laplace's and Poisons equations, Green's theorem, Gauss law, Concept of Bouguer gravity anomaly, Rock densities, factors controlling rock densities, determination of density, theory of isostasy, Earth's main magnetic field, origin, temporal variations, Geomagnetic elements, Columb's law of magnetic force and fields, intensity of magnetization and induction, magnetic potential and its relation to field, units of measurement, origin of magnetic anomalies, interrelationship between different components of anomalies, Poison's relation, Magnetic susceptibility, factors controlling susceptibility (Bulk chemistry, cooling history, metamorphism..), magnetic minerals, rock classification, Natural and remnant magnetism, Asiatic and Spinner magnetometers, demagnetization effects. Principles of Gravity and Magnetic instruments, Plan of conducting GM surveys, reduction of gravity and magnetic data, Airborne magnetic surveys and magnetic gradient surveys, Shipborne surveys, Gravity and Magnetic data reduction, IGSN Gravity bases, International Gravity formula, IGRF corrections for magnetic field. Separation of regional and residual anomalies, ambiguity in interpretation, Application of GM surveys for Geodynamic studies, Mineral Exploration, Environmental studies...Data processing and interpretation of anomalies, modeling of anomalies. b.Electrical and Electromagnetic methods: Electrical properties of rocks and their measurement, concepts and assumptions of horizontally stratified earth, anisotropy and its effects on electrical fields, the geo electric section and geological section, D.0 Resistivity method, fundamental laws, concept on natural electric field, electrode configuration, choice of methods, Profiling, Vertical Electrical Sounding.SP Method, Origin of SP, application of SP surveys, Origin of Induced Polarization, Membrane and Electrode potential, time and frequency domains of measurement, IP, chargeability, percent frequency effect and metal factor, dipole theory of IP, Application of IP surveys for mineral exploration (disseminated sulphides). Electromagnetic methods/ Telluric/Magneto Telluric methods, Passive and Active source methods, Maxwell's equations, electromagnetic potential and wave equations, boundary conditions, long wave length approximation, depth of penetration, amplitude and phase relations, real and imaginary components, Principles of EM prospecting, various EM methods, Dip angle method, Turam method, moving source-receiver methods-horizontal loop (Slingram) method, AFMAG, and VLF methods, Airborne EM systems - rotary field method, INPUT method, EM Profiling and sounding, Interpretation of EM anomalies, Principles of Ground Penetrating Radar (GPR), Origin and characteristics of MT fields, Instrumentation, Field methods and interpretation of MT data and applications. c. Seismic Prospecting: Basic principles of seismic methods, Fermat's principle, Senell's law, Reflection, refraction and diffraction from multilayered medium, Reflection and transmission coefficients, propagation model for exploration seismology, Seismic resolution, Seismic absorption and anisotropy, Seismic data acquisition, sources of energy, Geophones, geometry of arrays, Instrumentation, digital recording Seismic Surveys: Principle for multilayer refraction Travel time curves, corrections, Interpretation of data, Reflection principles, CDP, data processing, corrections, NMO correction, Interpretation of data, Fundamental of VSP method, Seismic Tomography. Principles of High Resolution Seismic (HRS) for coal exploration d.Borehole Geophysics (Principles of Well logging): Objectives of well logging, fundamental concepts in borehole geophysics, borehole conditions, properties of reservoir rock formations, formation parameters and their relationships-formation factor, porosity, permeability, formation water resistivity, water saturation, irreducible water saturation, hydrocarbon saturation, residual hydrocarbon saturation; Arhcie's and Humble's equations; principles, instrumentations, operational procedures and interpretations of various geophysical logs, SP log, resistivity and micro resistivity logs, nuclear/radioactive logs, acoustic impedance and propagation logs, temperature log, caliper log and directional logs; production logging; clean sand and shaly sand interpretations; overlay and cross-plots of well-log data, determination of formation lithology, sub-surface correlation and mapping, delineation of fractures; application of well-logging in hydrocarbon, groundwater, coal, metallic and non-metallic mineral exploration. 

PART-B: 100 Marks a. Atomic and Molecular Physics and Properties and Characterization of materials: Quantum states of an electron in an atom; Electron spin; Stern-Gerlach experiment; Spectrum of Hydrogen, helium and alkali atoms; Relativistic corrections for energy levels of hydrogen; Hyperfine structure and isotopic shift; width of spectral lines; LS & JJ coupling; Zeeman, Paschen Back & Stark effect; X-ray spectroscopy; Electron spin resonance, Nuclear magnetic resonance, chemical shift; Rotational, vibrational, electronic, and Raman spectra of diatomic molecules; Frank - Condon principle and selection rules; Spontaneous and stimulated emission, Einstein A & B coefficients; Lasers, optical pumping, population inversion, rate equation; Modes of resonators and coherence length. Thermal properties, optical properties, fundamentals of transmission electron microscopy, study of crystal structure using TEM, study of microstructure using SEM. Resonance methods- Spin and an applied field- the nature of spinning particles, interaction between spin and a magnetic field, population on energy levels, the Larmor precession, relaxation times - spin-spin relation, spin-lattice relaxation, Electron spin resonance- Introduction, g factor, experimental methods, Nuclear Magnetic resonance- equations of motion, line width motional narrowing, hyperfine splitting, Nuclear Gamma Resonance: Principles of Mossbauer Spectroscopy, Line width, Resonance absorption, Mossbauer Spectrometer, Isomer Shift, Quadrupole splitting, magnetic field effects, applications. b.Nuclear and Particle Physics: Basic nuclear properties: size, shape, charge distribution, spin and parity; Binding energy, semi-empirical mass formula; Liquid drop model; Fission and fusion; Nature of the nuclear force, form of nucleon-nucleon potential; Charge-independence and charge-symmetry of nuclear forces; lsospin; Deuteron problem; Evidence of shell structure, single- particle shell model, its validity and limitations; Rotational spectra; Elementary ideas of alpha, beta and gamma decays and their selection rules; Nuclear reactions, reaction mechanisms, compound nuclei and direct reactions; Classification of fundamental forces; Elementary particles (quarks, baryons, mesons, leptons); Spin and parity assignments, isospin, strangeness; Gell-MannNishijima formula; C, P, and T invariance and applications of symmetry arguments to particle reactions,parity nonconservation in weak interaction; Relativistic kinematics. Crystalline and amorphous structure of matter; Different crystal systems, space groups; methods of determination of crystal structure; X-ray diffraction, scanning and transmission electron microscopes; Band theory of solids-conductors, insulators and semiconductors; Thermal properties of solids, specific heat, Debye theory; Magnetism: dia, para and ferromagnetism; elements of superconductivity; Meissner effect, Josephson junctions and applications; elementary ideas about high temperature superconductivity. c. Electromagnetic Theory: Electrostatics: Gauss' Law and its applications; Laplace and Poisson equations, boundary value problems; Magnetostatics: Biot-Savart law, Ampere's theorem, electromagnetic induction; Maxwell's equations in free space and linear isotropic media; boundary conditions on fields at interfaces; Scalar and vector potentials; Gauge invariance; Electromagnetic waves in free space, dielectrics, and conductors; Reflection and refraction, polarization, Fresnel's Law, interference, coherence, and diffraction; Dispersion relations in plasma; Lorentz invariance of Maxwell's equations; Transmission lines and wave guides; Dynamics of charged particles in static and uniform electromagnetic fields; Radiation from moving charges, dipoles and retarded potentials d. Classical Mechanics: Newton's laws; Phase space dynamics, stability analysis; Central-force motion; Two-body collisions, scattering in laboratory and centre-of-mass frames; Rigid body dynamics, moment of inertia tensor, noninertial frames and pseudoforces; Variational principle, Lagrangian and Hamiltonian formalisms and equations of motion; Poisson brackets and canonical transformations; Symmetry, invariance and conservation laws, cyclic coordinates; Periodic motion, small oscillations and normal modes; Special theory of relativity, Lorentz transformations, relativistic kinematics and mass-energy equivalence. .

 GEOPHYSICS - PAPER III : 200 Marks PART-A: 100 Marks a.Radiometric Exploration / Airborne Geophysical surveys for Geological Mapping: Principles of radioactivity, radioactivity decay processes, units, radioactivity of rocks and minerals, Instruments, Ionisation chamber, G-M counter, Scintillation meter, Gamma ray spectrometer, Radiometric prospecting for mineral exploration (Direct/Indirect applications), Radiometric prospecting for beach placers, titanium, zirconium and rare-earths, portable gamma ray spectrometry and radon studies in seismology, environmental Applications, logging methods, radiometric dating techniques. Airborne geophysical surveys, planning of surveys, sensors, data corrections, flight path recovery methods, applications in geological mapping, interpretation of maps, identification of structural features, altered zones. b.Marine Geophysics: Oceans and Seas, origin of continents and oceans, salinity, temperature and density of sea water. Introduction to Sea-floor features: Physiography, divisions of sea floor, continental shelves, slopes, aprons and abyssal planes, growth and decline of ocean basins, turbidity currents, submarine sedimentation and stratigraphy, occurrence of mineral deposits and hydrocarbons in offshore. Geophysical surveys and instrumentation, Gravity and Magnetic surveys, Instrumentation used in ship borne surveys, towing cable and fish, data collection and survey procedures, corrections and interpretation of data. Oceanic magnetic anomalies, sea floor spreading, Vine-Mathews hypothesis, geomagnetic time scale and dating sea floor, linear magnetic anomalies, Oceanic heat flow, ocean ridges, basins, marginal basins, rift valleys. Seismic surveys, energy sources, Finger, Boomer, Sparker, Exploder, Air gun, Vapour cook, Hydrophones, processing, data reduction and interpretation. Bathymetry, echo sounding, bathymetric charts, sea bed mapping, seabed sampling, dredging and coring, Navigation methods and Position location methods. c. Geophysical Signal Processing: Various types of signals, sampling theorem, aliasing effect, Fourier series and periodic waveforms, Fourier transform and its properties, Discrete Fourier transform and FFT, Auto and cross correlations, Power spectrum, Delta function, unit step function. Time domain windows, Z transform and properties, Inverse Z transform. Principles of digital filters, types of filters, moving average and recursive and non recursive filters Amplitude and phase response filters low pass, band pass and high pass filters, Processing of Random signals. Signal enhancement for gravity and magnetic maps; regional residual separation, continuations, evaluation of derivatives, pseudo gravity transformations, reduction to poles and equator, Improvement of signal to noise ratio, source and geophone arrays as spatial filters. Earth as low pass filter. d.Remote Sensing and GIS applications: Fundamental concepts of remote sensing, electromagnetic radiation spectrum, energy-frequencywavelength relationship, Boltzman Law, Wien Law, electromagnetic energy and its interactions in the atmosphere and with terrain features; elements of photographic systems, reflectance and emittance, false color composites, remote sensing platforms, flight planning, geosynchronous and sun synchronous orbits, sensors, resolution, parallax and vertical exaggeration, relief displacement, mosaic, aerial photo interpretation and geological application. Fundamentals of photogrammetry, satellite remote sensing, multi-spectral scanners, thermal scanners, microwave remote sensing, fundamental of image processing and interpretation for geological applications. Introduction to Geographic Information Systems (GIS) spatial data structures, visualization and querying, spatial data analysis.

PART-B: 100 Marks a.Solid State Physics: Crystalline and amorphous structure of matter; Different crystal systems, space groups; methods of determination of crystal structure; X-ray diffraction, scanning and transmission electron microscopes; Band theory of solids-conductors, insulators and semiconductors; Thermal properties of solids, specific heat, Debye theory; Magnetism: dia, pars and ferromagnetism; elements of superconductivity; Meissner effect, Josephson junctions and applications; elementary ideas about high temperature superconductivity. b.Laser systems: Light amplification and relation between Einstein A and B coefficients. Rate equations for three level and four level systems. Ruby laser, Nd-YAG laser, CO2 laser, Dye laser, Excimer laser, Semiconductor laser. c. Laser cavity modes: Line shape function and full width at half maximum (FWHM) for natural broadening, collision broadening, Doppler broadening, saturation behaviour of broadened transitioins, longitudinal and transverse modes. ABCD matrices and cavity stability criteria for confocal resonators. Quality factor, Qswitching, mode locking in lasers. Expression for intensity for modes oscillating at random and modes locke in phase. Methods of Q-switching and mode locking. Optical fiber waveguides, Fiber characteristics. d.Electronics and devices: Semiconductor devices (diodes, junctions, transistors, field effect devices, homo and hetero junction devices) device structure, device characteristics, frequency dependence and applications. Opto-electronic devices (solar cells, photo detectors, LEDs) Operational amplifiers and their applications. Digital techniques and applications (registers, counters, comparators and similar circuits). A/D and D/A converters. Microprocessor and microcontroller basics. Data interpretation and analysis. Precision and accuracy. Error analysis, propagation of errors. Least square fitting. Intrinsic extrinsic semiconductors, pn-p and n-p-n transistors; Amplifiers and oscillators; Op-amps; FET, JFET and MOSFET; Digital electronics-Boolean identities, De morgan's laws, logic gates and truth tables; simple logic circuits; thermistors, solar cells, fundamentals of microprocessors and digital computers. e. Digital electronics, Radar systems, Satellite communications: Digital circuits, Number systems and codes, Combination logic circuits, sequential logic circuits, microprocessor architecture, functional diagram, Pin description, Timing diagram of read cycle, timing diagram of write cycle. Data transfer techniques-Serial transfer, parallel transfer etc. Radar systems, signal and data processing, satellite communication-Fundamentals Designing a surveillance radar, tracking radar, signal and data processing, radar antenna parameters, satellite systems-communication satellite systems, communication satellites, orbiting satellites, satellite frequency bands, satellite orbit and inclinations. Multiple access techniques, earth station technology. f.Quantum Mechanics: Wave-particle duality; Wave functions in coordinate and momentum representations; Commutators and Heisenberg's uncertainty principle; Matrix representation; Dirac's bra and ket notation; Schroedinger equation (time-dependent and time-independent); Eigen value problems such as particle-in-a-box, harmonic oscillator, etc.; Tunneling through a barrier; Motion in a central potential; Orbital angular momentum, Angular momentum algebra, spin; Addition of angular momentum; Hydrogen atom, spin-orbit coupling, fine structure; Time-independent perturbation theory and applications; Variational method; WKB approximation; Time dependent perturbation theory and Fermi's Golden Rule; Selection rules; Semi-classical theory of radiation; Elementary theory of scattering, phase shifts, partial waves, Born approximation; Identical particles, Pauli's exclusion principle, spin-statistics connection; Relativistic quantum mechanics: Klein Gordon and Dirac equations.

 CHEMISTRY PAPER-I (Inorganic Chemistry): 200 Marks Chemical periodicity: Periodic table, group trends and periodic trends in physical properties. Classification of elements on the basis of electronic configuration. Modern IUPAC Periodic table. General characteristic of s, p, d and f block elements. Effective nuclear charges, screening effects, atomic radii, ionic radii, covalent radii. Ionization potential, electron affinity and electro-negativity. Group trends and periodic trends in these properties in respect of s-, p- and d-block elements. General trends of variation of electronic configuration, elemental forms, metallic nature, magnetic properties, catenation and catalytic properties, oxidation states, aqueous and redox chemistry in common oxidation states, properties and reactions of important compounds such hydrides, halides, oxides, oxy-acids, complex chemistry in respect of s-block and p-block elements. Chemical Bonding and structure: Ionic bonding: Size effects, radius ratio rules and their limitations. Packing of ions in crystals, lattice energy, Born-lande equation and its applications, Born-Haber cycle and its applications. Solvation energy, polarizing power and polarizability, ionic potential, Fazan's rules. Defects in solids. Covalent bonding: Lewis structures, formal charge. Valence Bond Theory, Molecular orbital Theory, hybridizations, VSEPR theory. Partial ionic Character of covalent bonds, bond moment, dipole moment and electro negativity differences. Concept of resonance, resonance energy, resonance structures. Schrodinger equation for the H-atom. Coordinate bonding: Werner theory of coordination compounds, double salts and complex salts, Lewis acidbase. Ambidentate and polydentate ligands, chelate complexes. IUPAC nomenclature of coordination compounds. Coordination numbers, Geometrical isomerism. Stereoisomerism in square planar and octahedral complexes. Hydrogen bonding. Metallic bonding: qualitative idea of band theory, conducting, semi conducting and insulating properties. Chemistry of coordination compounds: Isomerism, reactivity and stability: Determination of configuration of cis- and trans- isomers by chemical methods. Labile and inert complexes, substitution reaction on square planer complexes, trans effect. Stability constants of coordination compounds and their importance in inorganic analysis. Structure and bonding: Elementary Crystal Field Theory: splitting of do configurations in octahedral, square planar and tetrahedral fields, crystal field stabilization energy; pairingenergy. Jahn-Teller distortion. Metal-ligand bonding, sigma and pi bonding in octahedral complexes and their effects on the oxidation states of transitional metals . Orbital and spin magnetic moments, spin only moments of and their correlation with effective magnetic moments, d-d transitions; LS coupling, spectroscopic ground states, selection rules for electronic spectral transitions; spectro-chemical series of ligands; charge transfer spectra . Acid-Base reactions Acid-Base concept: Arrhenius concept, theory of solvent system, Bronsted-Lowry's concept, relative strength of acids, Pauling rules. Lewis concept. Acidbase equilibria in aqueous solution and pH. Acid-base neutralisation curves; indicator, choice of indicators. Precipitation and Redox Reactions: Solubility product principle, common ion effect. Ion-electron method of balancing equation of redox reaction. Standard redox potentials, Nernst equation. Influence on complex formation, precipitation and change of pH on redox potentials; formal potential. Feasibility of a redox titration, redox potential at the equivalence point, redox indicators. Redox potential diagram of common elements and their applications. Disproportionation and comproportionation reactions. Organo metallic compounds: 18-electron rule and its applications to carbonyls, nitrosyls, cyanides, and nature of bonding involved therein. Simple examples of metal-metal bonded compounds and metal clusters. Metal-olefin complexes: zeises salt, Ferrocene. Nuclear chemistry: Radioactive decay - General characteristics, decay kinetics, parent -daughter decay growth relationships, determination of half-lives, Nuclear models -shell model, liquid drop model, Fermi gas model, Collective model and optical model. Nuclear stability. Decay theories. Nuclear reactions- fission, fusion and spallation reactions. Definition of curie and related calculations, preparation of artificial radionuclides by bombardment, radiochemical separation techniques. Experimental techniques in the assay of radioisotopes, gas filled detectors-ionization chamber, proportional and Geiger-Muller counters -G.M. Plateau, dead time, coincidence loss, determination of dead time, scintillation counters, solid state detectors. s-Block Elements : Hydride , hydration energies, solvation and complexation tendencies of alkali and alkaline-earth metals, principle of metallurgical extraction, Chemistry of Li and Be, their anomalous behaviour and diagonal relationships, alkyls and aryls. p-Block Elements : Comparative study of group 13 & 14 elements with respect to periodic properties. Compounds such as hydrides, halides, oxides and oxyacids; diagonal relationship; preparation, properties, bonding and structure of diborane, borazine and alkalimetal borohydrides. Preparation, properties and technical applications of carbides and fluorocarbons. Silicones and structural principles of silicates. Chemistry of d- and f- block elements: General comparison of 3d, 4d and 5d elements in term of electronic configuration, elemental forms, metallic nature, atomization energy, oxidation states, redox properties, coordination chemistry, spectral and magnetic properties. f-block elements: electronic configuration, ionization energies, oxidation states, variation in atomic and ionic (3+) radii, magnetic and spectral properties of lanthanides, comparison between lanthanide and actinides, separation of lanthanides (by ion-exchange method). Chemistry of some representative compounds: K2Cr2O7, KMnO4, K4[Fe(CN)6], K2[Ni(CN)4], H2PtC16, Na2[Fe(CN)5N0]. 

CHEMISTRY PAPER-II (Physical Chemistry) :200 Kinetic theory and the gaseous state: Gaseous state: Gas laws, kinetic theory of gas, collision and gas pressure, derivation of gas laws from kinetic theory, average kinetic energy of translation, Boltzmann constant and absolute scale of temperature. Maxwell's distribution of speeds. Kinetic energy distribution, calculations of average, root mean square and most probable velocities. Principle of equipartition of energy and its application to calculate the classical limit of molar heat capacity of gases. Collision of gas molecules, Real gases: Collision diameter; collision number and mean free path; frequency of binary collisions; wall collision and rate of effusion. Real gases, Deviation of gases from ideal behaviour; compressibility factor; Andrew's and Amagot's plots; van der Waals equation and its characteristic features. Existence of critical state. Critical constants in terms of van der Waals constants. Law of corresponding state and significance of second virial coefficient. Boyle temperature. Intermolecular forces. Liquid state: physical properties of liquids and their measurements: surface tension and viscosity Solids: Nature of solid state, law of constancy of angles, concept of unit cell, different crystal system, Bravais lattices, law of rational indices, Miller indices, symmetry elements in crystals. X-ray diffraction, Bragg's law, Laue's method, powder method, radius ratio and packing in crystals. Thermodynamics: Definition of thermodynamic terms. Thermodynamic functions and their differentials. Zeroth law, First law and Second law of thermodynamics. Cyclic, reversible and irreversible processes. Internal energy (U) and enthalpy (H); relation between Cp and Cv, calculation of w, q, ?U and ?H for expansion of ideal gas under isothermal and adiabatic conditions for reversible and irreversible processes including free expansion. Joule-Thomson Coefficient and inversion temperature. Application of First law of thermodynamics. Application of Second law of thermodynamics. Carnot cycle and its efficiency, Gibbs function (G) and Helmholtz function (A), Gibbs-Helmholtz equation, criteria for thermodynamic equilibrium and spontaneity of a process. Chemical equilibrium: chemical equilibria of homogeneous and heterogeneous systems, derivation of expression of equilibrium constants, Le Chatelier's principle of dynamic equilibrium. Thermodynamics and Equilibrium: Chemical potential in terms of Gibb's free energy and other thermodynamic state functions and its variation with temperature and pressure. Gibbs-Duhem equation; fugacity of gases and fugacity coefficient. Thermodynamic conditions for equilibrium, degree of advancement. Van't Hoffs reaction isotherm. Equilibrium constant and standard Gibbs free energy change. Definitions of KP, KC and Kx; van't Hoffs reaction isobar and isochore. Le Chatelier's principle. Activity and activity coefficients of electrolyte / ion in solution. Debye-Huckel limiting law. Acids-bases and solvents: Modern aspects of acids and bases: Arrhenius theory, theory of solvent system, Bronsted and Lowry's concept, Lewis concept with typical examples, applications and limitations. Strengths of acids and bases. Ionization of weak acids and bases in aqueous solutions, application of Ostwald's dilution law, ionization constants, ionic product of water, pH-scale, buffer solutions and their pH values, buffer actions & buffer capacity; hydrolysis of salts. Solutions of non-electrolytes: Colligative properties of solution, Raoult's Law, relative lowering of vapor pressure, osmosis and osmotic pressure; elevation of boiling point and depression of freezing point of solvents. Chemical kinetics and catalysis: Order and molecularity of reactions, rate laws and rate equations for first order and second order reactions; zero order reactions. Parallel and consecutive reactions. Determination of order of reactions. Temperature dependence of reaction rate, energy of activation. Enthalpy of activation, entropy of activation , effect of dielectric constant and ionic strength of reaction rate, kinetic isotope effect; collision theory & transition State Theory of reaction rate, Catalytic reactions. Adsorption and Surface Chemistry: Physisorption & Chemisorption, adsorption isotherms, Freundlich and Langmuir adsorption isotherm, BET equation, surface area determination, heterogeneous catalysis; colloids, electrical double layer and colloid stability, electro-kinetic phenomenon; elementary ideas about soaps & detergents, micelles, emulsions. Electrochemistry: Conductance: cell constant, specific conductance and molar conductance. Kohlrausch's law of independent migration of ions, ion conductance and ionic mobility. Equivalent and molar conductance at infinite dilution. Ostwald's dilution law. DebyeHuckel theory. Application of conductance measurement. Conductometric titrations. Determination of transport number by moving boundary method. Types of electrochemical cells, cell reactions, emf and change in free energy, 6.H and AS of cell reactions. Nernst equation. Standard cells. Half-cells /electrodes, different types of electrodes. Standard electrode potential and principles of its determination. Types of concentration cells. Liquid junction potential. Glass electrode and determination of pH of a solution. Potentiometric titrations: acid-base and redox, electro chemical power sources; primary, secondary and fuel Cells, corrosion and inhibition of corrosion. Photochemistry : Frank-Condon principle and vibrational structure of electronic spectra. Bond dissociation and principle of determination of dissociation energy. Decay of excited states by radiative and non-radiative paths. Fluorescence and phosphorescence, Jablonsky diagram. Laws of photochemistry: Grotthus-Draper law, StarkEinstein law of photochemical equivalence and Lambert-Beers law; quantum yield and its measurement for a photochemical process, actinometry. Photostationary state. Photosensitized reactions. Kinetics of HI decomposition, H2-Br2 reaction, dimerisation of anthracene. Quantum Chemistry: Wave-particle duality, Photoelectric and Compton effects, de Broglie hypothesis. Eigenfunctions and eigenvalues. Uncertainty relation, Expectation value. Hermitian operator. Schrodinger time-independent equation: nature of the equation, acceptability conditions imposed on the wave functions and probability interpretations of wave function. Schrodinger equation for one-dimensional box and its solution. Comparison with free particle eigenfunctions and eigenvalues. Basic principles and application of spectroscopy: Electromagnetic radiation, interaction with atoms and molecules and quantization of different forms of energies. Condition of resonance and energy of absorption for various types of spectra; origin of atomic spectra, spectra of hydrogen atoms, many electron atoms, spin and angular momentum. Rotational spectroscopy of diatomic molecules: rigid rotor model, selection rules, spectrum, characteristic features of spectral lines. Determination of bond length, effect of isotopic substitution. Vibrational spectroscopy of diatomic molecules: Simple Harmonic Oscillator model, selection rules, Raman Effect. Characteristic features and conditions of Raman activity with suitable illustrations. Rotational and vibrational Raman spectra. UV Spectra: Electronic transition (a-a*, n-u*, IT-1T" and n-n'), relative positions of Amax considering conjugative effect, steric effect, solvent effect, red shift (bathochromic shift), blue shift (hypsochromic shift), hyperchromic effect, hypochromic effect (typical examples). IR Spectra: Modes of molecular vibrations, application of Hooke's law, characteristic stretching frequencies of O-H, N-H, C-H, C-D, C=C, C=N, C=0 functions; factors effecting stretching frequencies PMR Spectra: Nuclear spin, NMR active nuclei, principle of proton magnetic resonance, equivalent and nonequivalent protons, chemical shift ?), shielding / deshielding of protons, up-field and down-field shifts. NMR peak area, diamagnetic anisotropy, relative peak positions of different kinds of protons, substituted benzenes. 

CHEMISTRY PAPER-III:200 Marks PART-A (Analytical Chemistry): 100 Marks Theoretical basis of Quantitative inorganic analysis: Law of mass action, chemical and ionic equilibrium, solubility, Solubility product and common ion effect, effect of temperature upon the solubility of precipitates, the ionic product of water, pH, effect of temperature on pH, Salt hydrolysis, hydrolysis constant, degree of hydrolysis, buffer solutions, different types of buffers and Henderson's equation. Gravimetric Analysis: General principles, stoichiometry, calculation of results from gravimetric data. Properties of precipitates. Nucleation and crystal growth, factors influencing completion of precipitation. Co-precipitation and postprecipitation, purification and washing ofprecipitates. Precipitation from homogeneous solution, a few common gravimetric determinations-chloride as silver chloride, sulphate as barium sulphate, aluminum as the oxinate and nickel as dimethyl glyoximate. Sampling and treatment of samples for chemical analysis: Techniques of collection of Solids, liquids and gaseous samples, dissolution of solid samples, attack with water, acids, and alkalis, fusion with Na2CO3, NaOH, Na202, K2S207; Microwave assisted digestion techniques(Only elementary idea) Volumetric Analysis: Equivalent weights, different types of solutions, Normal solutions, Molar solutions, and molal solutions and their inter relations. Primary and secondary standard substances. principles of different type of titrations-i) acid-base titration, ii) redox titration, iii) complexometric titrations. Types of indicators - i) acid-base, ii) redox iii) metalion indicators. Principles in estimation of mixtures of NaHCO3 and Na2CO3 (by acidimetry); Principles of estimation of iron, copper, manganese, chromium (by redox titration); Acid base titrations: Principles of titrimetric analysis, titration curves for strong acid-strong base, weak acidstrong base and weak base-strong acid titrations, poly protic acids, poly equivalent bases, determining the equivalence point-theory of acid base indicators, colour change range of indicator, selection of proper indicator. Redox Titrations: Principles behind the lodometry, permaganometry, dichrometry, difference between iodometry and iodimetry. Potentiometry: Fundamentals of potentiometry. indicator and ion-selective electrodes. Membrane electrodes. Glass electrode for pH measurement, glass electrodes for cations other than protons. Liquid membrane electrodes, solid state ion selective detectors and biochemical electrodes. Applications of potentiometry. Direct potentiometric measurements-determination of pH and fluoride. Redox and potentiometer titrations- Balancing redox reactions, calculation of the equilibrium constant of the reaction, titration curves, visual end point detection. Redox indicators-theory, working and choice. Potentiometric end point detection. Applications of redox titrations. Complexometric titrations: Complex formation reactions, stability of complexes, stepwise formation constants, chelating agents, EDTA-acidic properties, complexes with metal ions, equilibrium calculations involving EDTA, conditional formation constants, derivation of EDTA titration curves, effect of other complexing agents, factors affecting the shape of titration curves-completeness of reaction, indicators for EDTA titrations-theory of common indicators, titration methods employing EDTA-direct, back and displacement titrations, indirect determinations, titration of mixtures, selectivity, masking and de-masking agents, typical applications of EDTA titrations-hardness of water, magnesium and aluminium in antacids, magnesium, manganese and zinc in a mixture, titrations involving uni-dentate ligands-titration of chloride with Hg2+ and cyanide with Ag+. Chromatographic methods of analysis: Basic principles and classification of chromatography. Importance of column chromatography and thin layer chromatography; Theory and principles of High Performance Liquid Chromatography (HPLC) and Gas Liquid Chromatography (GLC). Ion-exchange chromatography. UV-Visible Spectroscopy: Basic Principles of UV-Vis spectrophotometer. Lambert -Beer's Law and its limitations. Instrumentation consisting of source, monochromator, grating and detector. Spectrophotometric determination. Flame photometry and Atomic absorption spectrometry: Emission spectra Vs absorption spectra. Basic Principles and theory of flame photometry. Applications of Flame photometers. Basic Principles and theory of AAS. Three different modes of AAS - Flame-MS, VGAAS, and GFAAS. Single beam and double beam AAS. Function of Halo Cathode Lamp (HCL) and Electrode Discharge Lamp (EDL). Different types of detectors used in MS. Different types of interferences-Matrix interferences, chemical interferences, Spectral interferences and background correction in AAS. Use of organic solvents. Quantitative techniques-calibration curve procedure and the standard addition technique. Typical commercial instruments for FP and MS. Applications. Qualitative and qualitative analysis. Relative detection abilities of atomic absorption and flame emission spectrometry. X-ray methods of Analysis: Introduction , theory of X-ray generation, X-ray spectroscopy, X-ray diffraction and X-ray fluorescence methods, Braggs law, instrumentation , dispersion by crystals, applications. Preparation of pallets, glass beads, quantitative and qualitative measurement. Inductively coupled plasma spectroscopy: Theory and Principles, plasma generation, utility of peristaltic pump, sampler - skimmer systems, ion lens, quadrupole mass analyzer, dynode /solid state Detector, different type of interferences- spectroscopic and non-spectroscopic interferences, isobaric and molecular interferences, applications. Analysis of Minerals, Ores and Alloys: Analysis of Minerals and Ores- estimation of (i) CaCO3 , MgCO3 in dolomite (ii) Fe203, Al203, and TiO2 in Bauxite.(iii) MnO and Mn02 in Pyrolusite. Analysis of Metal and Alloys: (i) Cu and Zn in Brass (ii) Cu, Zn, Fe, Mn, Al and Ni in Bronze (iii) Cr, Mn, Ni, and P in Steel (iv) Pb, Sb, Sn in type metal. Analysis of petroleum and petroleum products: Introduction, constituents and petroleum fractionation. Analysis of petroleum products-specific gravity, viscosity, Doctor test, aniline point, colour determination, cloud point, pour point. Determination of water, neutralization value (acid and base numbers), ash content, Determination of lead in petroleum. Analysis of coal and coke-Types, composition, preparation of sample, proximate and ultimate anlaysis calorific value by bomb Calorimetry. PART-B (Organic Chemistry): 100 Marks Basic organic chemistry: Inductive effect, resonance and resonance energy. Homolytic and heterolytic bond breaking, electrophiles and nucleophiles; carbocations, carbanions and radicals (stability and reactivity). Alkanes, alkenes and alkynes: Synthesis and chemical reactivity of alkanes, mechanism of free-radical halogenation of alkanes. General methods of synthesis, electrophilic addition reactions and polymerization reaction (definition and examples only) of alkenes.General methods of synthesis, acidity, hydration and substitution reactions of alkynes. Organometallic compounds: Grignard reagents - preparations and reactions, application of Grignard reagents in organic synthesis. Organic compounds containing nitrogen: aromatic nitro compounds - reduction under different conditions. Methods of synthesis of aliphatic amines, Heinsberg's method of amine separation, Hofmann degradation, Gabriel's phthalimide synthesis, distinction of primary, secondary and tertiary amines; methods of synthesis of aromatic amines, basicity of aliphatic and aromatic amines. Sandmeyer reactions; synthetic applications of benzene diazonium salts. Bonding and physical properties: Valence bond theory: concept of hybridisation, resonance (including hyperconjugation), orbital pictures of bonding sp3, sp2, sp: C-C, C-N & C-0 system). Inductive effect, bond polarization and bond polarizability, steric effect, steric inhibition of resonance. MO theory: sketch and energy levels of MOs of i) acyclic p orbital system ii) cyclic p orbital system, iii) neutral system. Frost diagram, Huckel's rules for aromaticity & antiaromaticity; homoaromaticity. Physical properties: bond distance, bond angles, mp/bp & dipole moment in terms of structure and bonding. Heat of hydrogenation and heat of combustion. Aldol and related reactions: Keto-enol tautomerism, mechanism and synthetic applications of aldol condensations, Claisen reaction, Schmidt reaction, Perkin reaction, Knovenogal, benzoin, Cannizaro reaction, Michael addition. Aromatic substitution reactions - electrophilic, nucleophilic and through benzynes - radical substitution of arenes - orientation of nucleophilic substitution at a saturated, carbon, SN1, SN2, SNi reactions -effect of structure, nucleophile, leaving group, solvent. Additions involving electrophiles, nucleophiles and free radicals. Mechanism of some name reactions: Aldol, Perkin, Benzoin, Cannizaro, Wittig, Grignard, Reformatsky, Hoffmann, Claisen and Favorsky rearrangements. Openauer oxidation, clemmensen reduction, Meerwein - Pondorf and Verley and Birch reductions. Stork enamine reactions, Michael addition, Mannich Reaction, Diels -Alder reaction. Electrocyclic Reactions: Molecular orbital symmetry, frontier orbitals of ethylene, 1,3 Butadiene, 1,3,5- Hexatriene, ally! system, classfication of pericyclic reactions FMO approach, Woodwrd-Hoffman correlation diagram method and perturbation of molecular (PMO) approach for the explanation of pericyclic reactions under thermal and photochemical conditions. Conrotatory and disotatory motions (4n) and (4n+2). Organic Reaction Mechanisms: Addition Elimination Mechanisms: (a) Addition to carbon multiple bonds-hydrogenation of double and triple bonds, hydroboration, birch reduction, Michael reaction, addition of oxygen and N, (b) Addition to carbonhetero atom multiple bonds: Mannich reaction,Reductions of Carbonyl compounds, acids, esters, nitrites, addtion of Grignard reagents, Reformatsky reaction, Tollen's reaction, Wittig reaction: (c) Elimination reactions: Stereochemistry of eliminations in acyclic and cyclic systems, orientation in eliminations - Saytzeff and Hoffman elimination. Organic Spectroscopy: Infrared spectroscopy: Units of frequency wave length and wave number, molecular vibrations, factors influencing vibrational frequencies, the IR spectrometer, characteristic frequencies of organic molecules and interpretation of spectra. Ultraviolet spectroscopy: Introduction, absorption laws, measurement of the spectrum, chromophores, definitions, applications of UV spectroscopy to Conjugated dines, trienes, unsaturated carbonyl compounds and aromatic compounds. Nuclear Magnetic Resonance Spectroscopy:(Proton and Carbon -13 NMR) The measurement of spectra, the chemical shift: the intensity of NMR signals and integration factors affecting the chemical shifts: spin-spin coupling to 13C IH-IH first order coupling: some simple IH-IH splitting patterns: the magnitude of IH-IH coupling constants. Mass spectroscopy: Basic Principles: instrumentation: the mass spectrometer, isotope abundances; the molecular ion, meta stable ions.

 HYDROGEOLOGY 200 Marks Section A: Origin, occurrence and distribution of water. Water on earth; Types of water — meteoric, juvenile, magmatic and sea water; Hydrological Cycle and its components; Water balance; Water-bearing properties of rocks — porosity, permeability, specific yield and specific retention; Vertical distribution of water; Zone of aeration and zone of saturation; Classification of rocks according to their water-bearing properties; Aquifers; Classification of aquifers; Concepts of drainage basins and groundwater basins; Aquifer parameters- transrnissivity and storage coefficient; Water table and piezometric surface; Fluctuations of water table and piezometric surface; Barometric and tidal efficiencies; Water table contour maps; Hydrographs; Springs; Geologic and geomorphic controls on groundwater; Hydrostratigraphic units;Groundwater provinces of India. Hydrogeology of arid zones of India;Hydrogeology of wet lands. Section B: Groundwater Hydraulics Theory of groundwater flow; Darcy's law and its applications; Determination of permeability in laboratory and in field; Flow through aquifers; steady, unsteady and radial flow conditions; Evaluation of aquifer parameters of confined, semi-confined and unconfined ° aquifers -Thiem, Thies, Jacob and Walton's methods; Groundwater modelling. Section C: Groundwater Exploration and Water Well Construction Geologic and hydrogeologic methods of exploration; Role of remote sensing in groundwater exploration; Hydrogeomorphic and lineament 'napping; Surface geophysical methods — seismic, gravity, geo-electrical and magnetic methods; Types of water wells and methods of construction; Design, development, maintenance and revitalization of wells; Sub-surface geophysical methods; Yield characteristics of wells; Pumping tests- methods, data analysis and interpretation; Se ct i o n D: Groundwater Qu ali ty Physical and chemical properties of water; Quality criteria for different uses; Graphical presentation of groundwater quality data; Groundwater quality in different provinces in India; Groundwater contamination; natural (geogenic) and anthropogenic contaminants; Saline water intrusion; Radio-isotopes in hydroLteological studies. Section E: Groundwater Management Groundwater problems related to foundation work, mining, canals and tunnels; Over-exploitation of groundwater and groundwater mining; Groundwater problems in urban areas; Ground water management in arid and semi arid areas; Climate change impact on graoundwater resources; Concept of sustainable development of groundwater resources; Groundwater management —supply side and demand side management; Rainwater harvesting and managed aquifer recharge; Conjunctive use of surface and groundwater; Groundwater legislation. 


FOR DETAILS CLICK;http://www.upsc.gov.in/sites/default/files/Notice_CGGE_2017_R.pdf

554 POSTS , SPECIAL MANAGEMENT EXECUTIVE,BANKING, SBI JOBS

State Bank of India invites on-line applications from Indian citizens for recruitment in the post of Special Management Executive (Banking).

Post  : Special Management Executive (Banking)
 Vacancy : 554 Posts

MMGS III : 273 Posts
MMGS II : 281 Posts

Qualification : CA / ICWA / ACS / MBA (Finance) or equivalent post graduation degree in Finance.
Nationality : Indian
Age Limit : 25 to 40 years for MMGS III and 25 to 35 years for MMGS II as on 31.03.2017


EMOLUMENTS: The scales of pay applicable to different grades are furnished above. The officials will also be eligible for DA, HRA and CCA as per rule in force from time to time. The compensation per annum on CTC basis at Mumbai is around `13.07 Lacs for an officer of MMGS - II and `15.86 Lacs for MMGS-III.


SELECTION PROCEDURE: Selection of candidates will be on the basis of online objective test, group exercise and/or interview. (*) Online Objective Examination : Candidates are required to qualify in each of the objective tests by securing minimum passing marks, which will be decided by the bank. Test Pattern : MMGS-II Grade OBJECTIVE TEST: ONLINE

SL NO TEST DETAILS NO OF QUESTIONS MARKS TIME

1 General / Banking Awareness 50 25 120 MINUTES

2 Reasoning, Data Interpretation & Analysis 50 50

3 English 50 25

4 Financial Data Interpretation & Analysis 50 50 TOTAL 200 150 MMGS-III Grade

 OBJECTIVE TEST: ONLINE

SL NO TEST DETAILS NO OF QUESTIONS MARKS TIME

 1. General / Banking Awareness 50 25 120 MINUTES

2 Reasoning, Data Interpretation & Analysis 50 50

3 English 50 25

4 Financial Data Interpretation & Analysis 50 100

TOTAL 200 200

GROUP EXERCISE AND / OR INTERVIEW (50) MARKS


DATE OF EXAMINATION: 18-06-2017 6.

CENTRE OF EXAMINATION: Ahemedabad, Baroda, Bangalore, Mysore, Bhopal, Indore, Bhubaneswar, Sambalpur, Chandigarh, Ludhiana, Jammu, Chennai, Madurai, Guwahati, Dibrugarh, Hyderabad, Vijayawada, Kolkata, Asansol, Lucknow, Varanasi, Mumbai, Nagpur, Delhi, Jaipur, Patna, Ranchi, Kochi,Trivandrum The bank, however reserves the right to add or delete any centre and allot the candidate to any centre other than the one he/she has opted for.

7. APPLICATION FEE AND INTIMATION CHARGE: (Non Refundable) Sr. No. Category Total 1 SC/ST/PWD `100/-(Intimation Charges only) 2 General and Others `600/-


ONLINE REGISTRATION OF APPLICATION & PAYMENT OF FEES : 03.05.2017 TO 18.05.2017


FOR DETAILS CLICK;https://www.sbi.co.in/webfiles/uploads/files/1493729344938_ADVERTISEMENT_ENGLISH.pdf

43 POSTS,. SUPERVISORS TECHNICAL OPERATIONS, VARIOUS MODES, SPMCIL JOBS

Security Printing & Minting Corporation of India Limited (SPMCIL), invites applications for the post of Supervisor (Technical) at S-1 level having all India transfer/posting liability.

. Vacancies/Posts: Indicative number of vacancies proposed to be filled up for the post of Supervisor (Technical Operations) at S-1 level is as detailed below: 

Projected Vacancies Reservation Status Sr. No Name of the post Leve l No of Posts Scale of Pay(IDA Pattern) UR SC ST OBC Total 

1 Supervisor(Technical Operations - Printing) S-1 20 Rs 12300- 25400 10 3 2 5 20 2 Supervisor(Technical Operations - Mechanical) S-1 10 Rs 12300- 25400 5 2 1 2 10 3 Supervisor(Technical Operations - Electronics) S-1 3 Rs 12300- 25400 3 - - - 3 4 Supervisor(TechnicalElectrical) S-1 8 Rs 12300- 25400 6 - - 2 8 5 Supervisor(Technical Support- Civil) S-1 2 Rs 12300- 25400 2 - - - 2 Total 43 26 5 3 9 43 

AGE – The eligibility criteria for determination of age and qualification etc. will be calculated as on 31.05.2017 Minimum age 18 years and maximum age 30 years as on closing date of receipt of applications i.e 31-05-2017. i.e. a candidate must have been born not earlier than 01-06-1987 and not later than 31-05-1999. 3. 

 QUALIFICATION & EXPERIENCE as on 31.05.2017  Post mentioned at Sl.No.01 : Supervisor (Technical Operations - Printing) ESSENTIAL: 1st class Diploma in Engineering in the area of Printing Technology or equivalent Diploma in related field from a recognised University/Institute. DESIRABLE: 1 st class B.E./B.Tech in Engineering in the area of Printing Technology or equivalent Degree in related field from a recognised University/Institute.  Post mentioned at Sl.No.02 : Supervisor(Technical Operations – Mechanical) ESSENTIAL: 1st class Diploma in Engineering in the area of Mechanical or equivalent Diploma in related field from a recognised University/Institute. DESIRABLE: 1st class B.E./B.Tech in Engineering in the area of Mechanical or equivalent Degree in related field from a recognised University/Institute.  Post mentioned at Sl.No.03 : Supervisor (Technical Operations – Electronics) ESSENTIAL: 1st class Diploma in Engineering in the area of Electronics or equivalent Diploma in related field from a recognised University/Institute. DESIRABLE: 1st class B.E./B.Tech in Engineering in the area of Electronics or equivalent Degree in related field from a recognised University/ Institute.  Post mentioned at Sl.No.04 : Supervisor (Technical Operations – Electrical) ESSENTIAL: 1st class Diploma in Engineering in the area of Electrical or equivalent Diploma in related field from a recognised University/Institute. DESIRABLE: 1st class B.E./B.Tech in Engineering in the area of Electrical or equivalent Degree in related field from a recognised University/ Institute.  Post mentioned at Sl.No.05 : Supervisor(Technical Support - Civil) ESSENTIAL: 1st class Diploma in Engineering in the area of Civil or equivalent Diploma in related field from a recognised University/Institute. DESIRABLE: 1st class B.E./B.Tech in Engineering in the area of Civil or equivalent Degree in related field from a recognised University/Institute. 

 EXAMINATION FEES: RS.400/-for all applicants and each post. (Candidates belonging to SC/ST/PWD/Ex-Servicemen are exempted from payment of application fees)  The candidates belonging to General and OBC(NCL) category are required to pay application fees of Rs.400/- only.  
Important Dates: Opening of website link for applying Online application. 03.05.2017 to 31.05.2017 Payment of fees in online mode 03.05.2017 to 31.05.2017 Tentative date of written examination which will be conducted "Online" at selected centres July’2017/August’2017

FOR DETAILS CLICK;http://cnpnashik.spmcil.com/UploadDocument/Final%20Advt%20Supervisor-Tech.bf729af5-1cc7-40d3-bf24-cd18e36f8197.pdf

161 POSTS, OFFICERS IN GRADE ' B' RBI JOBS

RESERVE BANK OF INDIA SERVICES BOARD, MUMBAI 

DIRECT RECRUITMENT FOR THE POSTS IN COMMON SENORITY GROUP (CSG) STREAMS – PANEL YEAR 2017

The Reserve Bank of India Services Board (Board) invites applications from eligible candidates for the post mentioned below in Reserve Bank of India (RBI/Bank):

 Post Number of Vacancies Unreserved i.e., General (GEN/UR) Other Backward Classes (OBC)# Scheduled Castes (SC) Scheduled Tribes (ST) TOTAL 

1. Officers in Grade 'B' (DR) - (General) 73 39 22 11 145 $ 2. Officers in Grade 'B' (DR) - DEPR 09 03 00 00 12 3. Officers in Grade 'B' (DR) - DSIM 01 00 1 02 * 4 # Candidates belonging to OBC category but coming in the 'Creamy Layer' are not entitled to OBC reservation. They should indicate their category as 'General (GEN)’. $ 
TOTAL 161 POSTS


HOW TO APPLY Candidates have to apply only online through the Bank's website i.e. www.rbi.org.in from 03/05/2017 (05/05/2017 for DEPR/DSIM) to 23/05/2017.


FOR DETAILS CLICK;https://rbidocs.rbi.org.in/rdocs/Content/PDFs/DEPRD030520179C40C723B6CE4AF187FF9AC709A025BE.PDF

246 POSTS, Veterinary Surgeon (HVS-II) in Animal Husbandry & Dairying Department, Haryana, HARYANA PSC JOBS

 HARYANA PUBLIC SERVICE COMMISSION BAYS NO. 1-10, BLOCK-B, SECTOR-4, PANCHKULA 

RECRUITMENT; 

The HARYANA PSC  re-invites online applications for recruitment to 246 temporary posts of Veterinary Surgeon (HVS-II) in Animal Husbandry & Dairying Department, Haryana.

 The breakup of the posts is as under:- Gen. SC of Hry. BC-A of Hry. BC-B of Hry. EBPG of Hry. ESM of Hry. Total PH of Hry. (Person with Locomotor Disability) 123 62 (including 15 post of shortfall) 24 11 11 15 (including 3 posts of shortfall) 246 9 Note1: The candidates who had applied earlier against Advt. No. 2/ 2014, (Cat. No. 8), Advt. No. 6(2)/2015, 


Scale of Pay : Rs. 9300-34800 PB-II 5400/- (Entry Level Pay Band) with an initial pay of Rs. 14,880/- + 5400/- G.P. 3. Age : A Candidate should not be below 22 years and not more than 42 years of age as on 01.07.2016.

The online application fees which is payable at all branches of State Bank of India, is as under:- 

S.No. Categories of Candidates Fees 

1. (i) For Male Candidates of General Category including Dependent Sons of Ex-Servicemen of Haryana. (ii) For Male candidates of all reserved categories of other States. Rs. 500/- 2. For Female candidates of all (General and Reserved) categories of all states. Rs. 125/- 3. For Male candidates of SC/BC-A/BC-B/EBP (Gen.) / ESM categories of Haryana only. Rs. 125/- 4. 

Haryana Public Service Commission will not be responsible for any delay on the part of Postal Department or Courier Agencies and all the applications received after the closing date 01.06.2017 will be rejected outrightly
FOR DETAILS CLICK;http://hpsc.gov.in/Instructions/2017/Inst%20Advt.%20No.%2001%20of%202017.pdf

173 POSTS, OPERATORS, VARIOUS TRADES, HAL JOBS

HINDUSTAN AERONAUTICS LIMITED 

 HAL, Accessories Division, Lucknow invites interested and eligible Operators for the following Trades, for the selection procedure for engagement on tenure basis at HAL, Accessories Division, Lucknow, U.P. :- 

Number of Posts : 173 (UR- 89, SC- 36, ST-2, OBC- 46) 

Post Code Trade No. of Post LT-C5-001 Machinist 16 LT-C5-002 Turner 21 LT-C5-003 Grinder 11 LT-C5-004 Fitter 95 LT-C5-005 Electronics Mechanic 19 LT-C5-006 Electrician 03 LT-C5-007 Instrumentation Mechanic 08 Total 173 

Qualification Requirement : Regular/ Full Time ITI + NAC / ITI + NCTVT after 10th Standard in the Trades of Machinist/ Turner/ Grinder/ Fitter/ Electrician/ Electronics Mechanic/ Instrumentation Mechanic. All qualifications should be from Institute recognized by the appropriate Statutory Authorities in the Country. For engagement, the candidate possessing higher technical qualifications than the required qualification indicated in the Advertisement/ Notification, need not apply. Candidates pursuing / enrolled for any other qualifications should mandatorily indicate the same in the application format. Candidature of such personnel who possesses higher qualification than the required qualification indicated in the Advertisement/ Notification will be rejected at any stage of the recruitment/ selection.

 Age Limit/ Relaxation/ Concession :  Upper age limit as on 01/02/2017 will be for UR- 28 years; SC/ST- 33 years; OBC(NCL)- 31 years. Candidates belonging to OBC – Non-creamy layer category are required to submit OBC certificate not older than six months as on 01/02/2017, in the prescribed format at the time of document verification. The SC/ST category is also required to produce the community certificate in proof of their community at the time of document verification in the prescribed format. 


 Applications for various posts shall be received online. Eligible and interested candidates are required to apply online only through the link given in HAL Website i.e. www.halindia.com. No other means/ mode of application will be accepted. The Website will remain functional from 08:00 Hrs. on 03/05/2017 to 24:00 Hrs. on 16/05/2017 for submission of online application.  


Candidates who have applied against our earlier Notification No. HALADL/1211/HR/R/2017/03 Dated 27.03.2017 need not apply again as their application against the same will be considered.  In case of any particular query not covered above, the candidate can write to HAL at E-mail ID recruitment.adlko@hal-india.com only. No other method of communication will be entertained. - :: 0 :: -

FOR DETAILS CLICK;http://hal.eadmissions.net/images/HAL_2017_Notification.pdf 

56 POSTS, JOIN ARMY ,DENTAL CORPS AS SHORT SERVICE COMMISSIONED OFFICER

 JOIN ARMY ,DENTAL CORPS AS SHORT SERVICE COMMISSIONED OFFICER 

Applications are invited from Indian citizens, both male and female, for grant of Short Service Commission in the Army Dental Corps. 

VACANCIES: 56 (Fifty-Six) 

QUALIFICATION: Candidates must be BDS/MDS (with minimum 55% marks in final year BDS) from a College/University recognized by Dental Council of India (DCI). He/she should have completed one-year compulsory rotatory Internship mandated/recognized by DCI by 31 Mar 2017 and must be in possession of Permanent Dental Registration Certificate of State Dental Council/DCI valid at least up to 31 Dec 2017.

 Note: - Only those candidates (BDS/MDS) who have appeared in the National Eligibility-cumEntrance Test, NEET (MDS)-2017 conducted by National Board of Examinations (NBE), New Delhi, under the aegis of Ministry of Health & Family Welfare, on dates between 30th Nov---03rd Dec 2016, at various examination centers of NBE, are eligible to apply. Candidates must submit the copy of Mark-sheet/Score card of NEET (MDS)-2017 along with the application. 

AGE LIMIT: The candidate must not have attained 45 yrs of age as on 31 Dec 2017. 

 LAST DATE FOR RECIEPT OF APPLICATIONS IS 15 May 2017 


FOR DETAILS CLICK;https://indianarmy.nic.in/writereaddata/documents/Advt%20for%20vac%20AD%20Corps%20SSC-2017.pdf

INDIAN ARMY, RECRUITMENT RALLY 01 --05 JUNE ,17 ARTILLERY CENTER. HYDERABAD

 RECRUITMENT RALLY SCHEDULE FOR THE MONTH OF JUN 17 ARTILLERY CENTRE. HYDERABAD 

Date CaVTrade States/Region Remarks tt-tz

01 Jun 17 Sol Clk/SKT Any State / UT of India (Son/Brother of ExServicemen/ Serving Soldier and son of War Widow of Regt of ArtillerY onlY) CEE 30 Jul 17 

O2 Jun 17 Sol GD Arunachal Pradesh, Assam, Chandigarh, Delhi, Faridabad & Gurgaon, Himachal Pradesh, J&K, Jharkhand, Maharashtra, Meghalaya, Manipur, Mizoram, Nagaland, Nepal, Odisha, Sikkim, Tripura, Uttar Pradesh, Uttarakhand & West Benqal CEE 27 Aug 17 

03 Jun 17 Sol GD Andhra Pradesh, Andaman & Nicobar, Bihar, Chhattisgarh, Dadar Nagar Haveli, Daman & Diu, Gujrat, Goa, Haryana, Karnataka, Kerala, Lakshadweep, Madhya Pradesh, Pondicherry, Punjab, Rajasthan, Tamil Nadu, Telangana, Sol SHGD Anv State/ UT of India 

04 Jun 17 Sol Tech (Svyr) Any State/ UT of lndia Sol GD Outstanding Sportsmen sponsored by Unit and BSC Candidates 

05 Jun 17 Sol Tdn incl Musn Any State/ UT of lndia 06 Jun 17 Sol Tdn (Musn) Aptitude Test Med witl,commence from 02 Jun 17.

FOR DETAILS  CLICK;http://www.joinindianarmy.nic.in/writereaddata/Portal/News/87_1_RALLY_SCHEDULE_UHQ_QUOTA_ARTY_CENTRE_HYD.pdf

INDIAN ARMY RECRUITMENT RALLY (BHAI-BANDH, RELATION BHARTI) 15th - 19th MAY, BEG & CENTRE ROORKEE

INDIAN ARMY RECRUITMENT RALLY  (BHAI-BANDH, RELATION BHARTI) 15th - 19th MAY, BEG & CENTRE ROORKEE 


. Recruitment rally (Bhai-Bandh, Relation Bharti) for recruitment into Bengal Engineer Group, Corps of Engineers, Indian Army under Unit Headquarter Quota for sons of Servicemen/Ex-Servicemen/War widows and real brothers of servicemen/Ex-servicemen & sportsmen of International/National level is scheduled from 15 to 19 May 2017.


SOLDIER TECHNICAL. (a) Age - 17½ - 23 yrs. (born between 15 May 1994 and 15 Nov 1999 both inclusive). (b) Qualification - 12th Pass in Science stream with Physics, Chemistry, Maths and English with minimum 50% marks in aggregate & 40% in each subject. 3. SOLDIER GENERAL DUTY. (a) Age - Age 17½ – 21 yrs (born between 15 May 1996 and 15 Nov 1999 both inclusive). (b) Qualification - Min 10th class or equivalent pass with minimum 45% marks in aggregate & minimum 33% in each subject OR 10+2 pass (any stream).

. SOLDIER TDN. (a) Age - 17½ - 23 yrs (born between 15 May 1994 and 15 Nov 1999 both inclusive). (b) Qualification - 10th class pass (any stream) - Washerman & Support Staff (ER). 8 th class pass - House Keeper. 

 SOL CLK/SKT/IM (only for sons of Servicemen/Ex-Servicemen/Widows/War widows and real brothers of servicemen/Ex-servicemen of Bengal Sappers). (a) Age - 17½ - 23 yrs (born between 15 May 1994 and 15 Nov 1999 both inclusive). (b) Qualification - Min 12th with 60% marks in aggregate and 50% in each subject. English and Maths/Accts/Book Keeping are compulsory at 12 th or 10 th level with 50% marks. Even if candidate is a graduate or has a higher qualification, percentage marks scored in class XII would take precedence


FOR DETAILS CLICK http://www.joinindianarmy.nic.in/writereaddata/Portal/News/89_1_Advertisement_of_BEG__amp;_Centre__Roorkee_Recruitment_Rally_Scheduled_to_be_held_wef_15_to_19_May_2017..pdf

INDIAN ARMY JOBS, HAVILDAR EDUCATION, ARMY EDUCATION CORPS,SCIENCE, ARTS STREAM

 RECRUITMENT NOTIFICATION OF HAVILDAR EDUCATION IN THE ARMY EDUCATIONAL CORPS IN SCIENCE AND ARTS STREAM 

 Applications are invited from eligible male candidates for recruitment as Havildar Education in Science and Arts streams in the Army Educational Corps of Indian Army. 

Vacancies. Vacancies will be released at the end of recruiting process by the concerned Army authorities. 

 Eligibility. (a) Age Limit.

 (i) Civilian Candidates. 20 to 25 years of age as on 01 Oct 2017 (i.e. Candidates born between 01 Oct 1992 and 30 Sep 1997 inclusive of both dates). 

(ii) Serving Combatants on Remusteration. 20 to 28 years of age as on 01 Oct 2017 (i.e. Candidates born between 01 Oct 1989 and 30 Sep 1997 inclusive of both dates).

 (b) Educational Qualification. 

The candidate must have working knowledge of either English or Hindi or both. Candidate should have graduation / post graduation degree from a recognised university.

 (i) Science Stream. B Sc / B Sc(IT) / BCA / BE / B Tech / M Sc / M Sc(IT) / MCA / M Tech (with or without B Ed) with any of the following subjects:- (aa) Physics (ae) Botany (ab) Chemistry (af) Zoology (ac) Mathematics (ag) Electronics (ad) Biology (ah) Computer Science

 (ii) Arts Stream. BA / MA (with or without B Ed) with any of the following subjects:- (aa) English Literature (af) Political Science (ab) Hindi Literature (ag) Economics (ac) Urdu Literature (ah) Psychology (ad) History (aj) Mathematics (ae) Geography (ak) Sociology www.joinindianarmy.nic.in Detailed notification website English (2) 

 Medical Standard. 

(a) A candidate should have robust physique and mental health, chest should be well developed having minimum 5 cm expansion, should have normal hearing with each ear, should have sufficient number of natural teeth, i.e. 14 dental points with healthy gums. Candidate should not have diseases like deformity of bones, hydrocele, varicose veins or piles. 

(b) Serving combatants on Remusteration candidates must be in medical category SHAPE-1A. Remusteration candidates will be exempted from recruiting medical examination at the time of recruiting rally. A certificate indicating medical category duly signed by Army Medical Authority where individual is serving and countersigned by the Commanding Officer of the unit will be submitted by the candidate.

 5. Minimum Physical Standards. Country has been divided into regions. Region wise minimum physical standards are as follows:-

 S No Region Height (cm) Chest (cm) Weight (kg) 

(a) Western Himalayan1 162 77 48 

(b) Eastern Himalayan2 160 77 48

 (c) Rest of the Country 162 77 50 


 Written examination will be conducted on 29 Oct 2017 and will comprise of two papers as follows:- 

(i) PAPER- I. Paper-I will be common and compulsory for all candidates. This paper will consist of 50 objective type questions on general awareness and general English.

 (ii) PAPER-II (Science Stream) (Maximum Marks - 50). This paper will be compulsory for science stream candidates. It will consist of 50 objective type questions from Physics, Chemistry, Computer Science, Biology and Mathematics

. (iii) PAPER-II (Arts Stream) (Maximum Marks - 50). This paper will be compulsory for Arts stream candidates. It will consist of 50 objective type questions from History, Geography, Political Science, Economics and Mathematics.

 (iv) Marking System. All answers will be marked on the OMR sheet. Paper Marks Maximum Pass Negative Paper-I 50 20 - 1 /4 per wrong answer Paper-II (Science Stream) 50 20 - 1 /4 per wrong answer Paper-II (Arts Stream) 50 20 - 1 /4 per wrong answer

Pay and allowances. 

(i) Group ‘X’ (Post Graduate / Graduate Degree with B. Ed.). on completion of successful training you will be placed in the Pay Band-1 (Rs 5200-20200) as per 6th pay commission. You will also be entitled Grade Pay (Rs 2800) + Military Service Pay (Rs 2000) + Group „X‟ Pay (Rs 1400) per month. 

(ii) Group ‘Y’ (Graduate Degree without B. Ed.). on completion of successful training you will be placed in the Pay Band-1 (Rs 5200-20200) as per 6th pay commission. You will also be entitled Grade Pay (Rs 2800) + Military Service Pay (Rs 2000) per month. 

 Online Registration. Online Registration will open on 01 May 2017 at 1000 Hrs. Online registration will be closed on 30 May 2017 at 1700 hrs.


FOR DETAILS CLICK;http://www.joinindianarmy.nic.in/writereaddata/Portal/News/91_1_HAV_EDN_NOTIFICATION_ENGLISH.pdf

23 POSTS, SCIENTIST 'B' ,DRDO JOBS

RAC invites online recruitment applications through RAC website http://rac.gov.in for the posts of Scientist `B’ in DRDO in Level-10 of the Pay Matrix (Rs. 56,100/-)in specified disciplines and categories. Total emoluments at the time of joining will be approximately Rs. 72,,000/- P.M. at the present Delhi Rate. 

DETAILS OF SUBJECT-WISE CATEGORY-WISE VACANCIES 

1 Aeronautical Engg 01 POST

2.. Computer Science/Engg. & Info Tech -07 POSTS

3.  Electronics & Comm. Engg 05 POSTS

4 Mechanical Engg  06 POSTS.

5 Instrumentation Engg . 01  POST.

6.  Civil Engg  01 post.

7 Naval Engg 02 posts

total 23 posts.

AGE LIMIT (as on closing date of advertisement) (As per Govt rules)
OBC (Non-creamy layer) : Not exceeding 31 years
SC/ST : Not exceeding 33 years.

Valid GATE score card (GATE 2015/2016/2017). (Only for Subject/Disciplines in Part I ).

FEES & MODE OF PAYMENT OBC candidates are required to pay a non-refundable non-transferable application fees of Rs.100/- (Rs. One Hundred only) payable online only. However there is no application fees for SC/ST /PWD and women candidates.

a) For Subjects/ Disciplines in Part I The final selection of the candidates will be purely on the basis of discipline wise category wise merit of aggregate of, 80% weightage to GATE score and 20% weightage to marks in personal interview. For consideration for selection, a candidate has to secure minimum qualifying marks of 60% for OBC/SC/ST candidates in Personal Interview. 

(b) For Subjects/ Disciplines in Part II The final selection of the candidates will be purely on the basis of merit of marks in personal interview. For consideration for selection, a candidate has to secure minimum qualifying marks of 60% for SC candidates in Personal Interview.

 IMPORTANT DATES : Online submission starts on the date of publication of Advertisement in Employment News at 1700 Hrs (IST) Online submission closes on 21 days from the date of publication of Advertisement at 1700 Hrs (IST) Personal interview schedule (Tentative) :  July 2017 for Subjects/Disciplines in Part I  September 2017 for `Naval Engg’ in Par


FOR DETAILS CLICK;https://rac.gov.in/cgibin/2017/advt_125/public/pdf/advt_125.pdf?ad4aadab3beb68ebe01a696f8c939f47=1

1114 POSTS, B.T. Assistants, TRB, CHENNAI JOBS

 GOVERNMENT OF TAMIL NADU TEACHERS RECRUITMENT BOARD,CHENNAI JOBS

DIRECT RECRUITMENT OF B.T. ASSISTANTS AND B.T. ASSISTANTS

The details are as follows.

Post : B.T. Assistants
Vacancy : 1114 Posts
Pay Scale : Rs. 9300– 34800/- Grade Pay : Rs. 4600/-

Distribution of Vacancies :

Backlog : 663 Posts
Current : 491 Posts


LAST DATE 10.5.2017

FOR DETAILS CLICK;http://trb.tn.nic.in/GA2016/27042017/btnotification.pdf

100 POSTS, PASHUDHAN VIKAS ADHIKARI,MPSC JOBS

100 POSTS, PASHUDHAN VIKAS ADHIKARI,MPSC JOBS

Maharashtra Public Service Commission (MPSC) invites application for the post of 100 PASHUDHAN VIKAS ADHIKARI,under Maharashtra Animal Husbandry Services, Group-A.

Post : PASHUDHAN VIKAS ADHIKARI,
Vacancy : 100 Posts
Pay Scale : Rs. 15600-39100/- GP : Rs.5400/-

Qualification : Graduate in Veterinary science OR Veterinary science & animal husbandry .
Age : Maximum 38 years for open & 43 years for reserved candidates as on 01.08.2017


Application Fee : UR Category - pay Rs.373/- and Rs.273/- for Reserved Category .

Starting Date : 26.04.2017
Last Date : 16.05.2017

FOR DETAILS CLICK;https://mahampsc.mahaonline.gov.in/MPSC/AdvtList/24-2017.pdf

181 POSTS, VIKRIKAR NIRIKSHAK MUKHY PARIKSHA 2016, MPSC JOBS

MPSC Recruitment 2017 for Sales Tax Inspector 

Vacancies : 181

Qualification : GRADUATE FROM RECOGNIZED UNIVERSITY

Age Limit as on 01/08/2017
Open Candidates ; Maximum – 38 Years

Reserved candidates; Maximum – 43 Years

Application Fees
General Category – Rs.523/-
Reserved Category – Rs.323/-

Application Begin – 29/04/2017
Last Date – 13/05/2017

FOR DETAILS CLICK; https://mahampsc.mahaonline.gov.in/MPSC/AdvtList/25-2017.pdf

1008 POSTS, SALES TAX INSPECTOR, POLICE SUB INSPECTOR, ASSISTANT DESK OFFICER, MPSC JOBS

MPSC Jobs ; 1008 POSTS, SALES TAX INSPECTOR, POLICE SUB INSPECTOR, ASSISTANT DESK OFFICER, MPSC JOBS

Maharashtra Public Service Commission (MPSC) invites application for the post of ;

1008 Assistant Desk Officer,
Sales Tax Inspector & Police Sub Inspector ;

Break up of vacancies:

Post : Assistant Desk Officer
Vacancy : 107 Posts
Scale : Rs. 9300-34800/- GP : Rs.4300/-

Post : Sales Tax Inspector
Vacancy : 251 Posts
Scale : Rs. 9300-34800/- GP : Rs.4300/-

Post: Police Sub Inspector
Vacancy : 650 Posts
Scale : Rs. 9300-34800/- GP : Rs.4300/-


Qualification : e Graduate from recognized University.
Age Limit : M 18 to 38 years for open Candidates & 18 to 43 years for reserved candidates for Assistant Desk Officer as on 01.08.2017 & Sales Tax Inspector as on 01.07.2017 and 19 to 31 years for open Candidates & 19 to 34 years for reserved candidates for Police Sub Inspector as on 01.08.2017


Application Fee : UR - Rs.373/- and Rs.273/- for Reserved Category

Starting Date for Submission of Online Application : 26.04.2017
Last Date for Submission of Online Application : 16.05.2017.

FOR DETAILS CLICK;https://mahampsc.mahaonline.gov.in/MPSC/AdvtList/23-2017.pdf

An Overview, Preparing Strategies for PROBATIONARY ENGINEERING, Bel jobs

In general their exam writing is a test based objective that consists of question related to your grade flow and basic paper aptitude.Question is not so difficult if you have covered gate syllabus very well. They ask basic fitness questions that can be prepared from any basic book like R.S Agarwal.

Once you are clearing the written test, you will be called for the interview. If you are a fresher, your interview will revolve around your area of ​​interest.

Choose at least 3-4 subjects, which you like best and read them through.

For example, For the CSE grad they may ask for core encoding themes like data structure, tree and algorithm related to this compiler design.

In addition, they may also ask questions related to projects from the last year.

Mechanical engineers would mainly have to do product design and strain-strain analysis, as this is a very fundamental part of the manufacturing process.

Technical Issues-120
Fitness -30
Total 150 questions have to be answered in just 150 minutes.
Hoevedr The Bel curriculum is the same as the gate program, but you can only expect theoretical questions for the bel exam. If you are a CE engg, then prepare digital electronic, analog electronic, communication and VLSI well.In BEL probation engineer exam (talking about ECE), the questions are easy and the level of complexity is lower. Usually the basic questions are there.

But the paper covers about 17-18 subjects in detail as-
Mathematics (I, II and III),
Network analysis,
Measuring instruments,
Fundamental of electronic devices,
Digital Electronics,
Antenna and propagation of waves,
Microelectronic circuits,
Integrated circuits,
Microprocessor,
Theory of the electromagnetic field,
Communication (Digital and analog),
Introduction to electronic drives,
Control system,
Signal system
Digital Signal Processing

Fitness is easier, no need to put any extra effort. So Go through all the GATE questions of the last 5 years.In order to do so the book GATE with solutions and R. K. Jain can be very useful.

The roles and responsibilities of PEs are similar to all the engineers employed in their respective SBUs.

When the interview time comes they collect the following details of the candidates to make them familiar with the profile of candidates;

Personal details

Education,

Experience,

Projects,

Stage and industrial exhibition

Achiements

Hobbies

Details about the employees of the same company

And the same is usually circulated between the members of the interview panel so that they know about the candidate in before hand.

You may have the following question to ask in the ECE branch;

TV waves work in what frequency band?
What do you know about bluetooth?
About load and line regulation
SMPS and its applications
Conversion from one flipflop to another (D, T, JK, SR)
Some questions about numerical systems (ASCII, weighted code, excess code 3)
A question about probability
The most important thing is your final project of the year

And If fortunately you are in then be ready for the following faces;

Training period: 30 days

All trainees are trained together in basic operation and company policies. You will be assessed for the ability and temperament to perform the assigned roles. At the end of the 4 weeks of training, you will receive your assignment and be assigned to report to SBU.

Trial period: 6 months

The first 6 months will be your internship period, where you will be monitored under your official reports and your assigned tasks. Upon successful completion of this period, you will receive the designation of Adjunct Engineer (DE).

Source Courtesy- Google  Search ,Compiled by Admin.

for notification of jobs click;http://govtrectt.blogspot.in/2017/04/66-posts-recruitment-of-probationary.html

EMPLOYMENT NEWS, JOB HIGHLIGHTS, 29th APRIL - 05 MAY 2017

No.of Vacancies : 74

INDIAN OIL CORPORATION LIMITED
Name Of Post : Jr. Engineering Assistant IV, Jr. Materials Assistant and Junior Quality Control Analyst
Last Date :19.05.2017
FOR DETAILS CLICK;http://govtrectt.blogspot.in/2017/04/74-posts-jr-engineering-assistant-jr.html

No.of Vacancies : 45
PUNJAB NATIONAL BANK
Name Of Post : Manager (Security)
Last Date :06.05.2017
FOR DETAILS CLICK;http://govtrectt.blogspot.in/2017/04/45-posts-manager-securitypnb-jobs.html

No.of Vacancies : 17
UNION PUBLIC SERVICE COMMISSION
Name Of Post : Foreman (Chemical, Electronics, Mechanical etc)
Last Date :11.05.2017
FOR DETAILS CLICK;http://govtrectt.blogspot.in/2017/04/17-posts-upsc-recruitment.html

No.of Vacancies : 188
NATIONAL SEEDS CORPORATION LIMITED
Name Of Post : Assistant (Legal), Management Trainee, Sr. Trainee etc
Last Date :06.05.2017
FOR DETAILS CLICK;http://govtrectt.blogspot.in/2017/04/188-posts-assistant-legal-management.html

No.of Vacancies : 240
CENTRAL RESERVE POLICE FORCE
Name Of Post : SI, ASI, Draughtsman and CT Pioneer
Last Date :05.05.2017
FOR DETAILS CLICK;http://govtrectt.blogspot.in/2017/03/240-posts-sioverseer-asi-draughtsman.html

710 POSTS, UPSC /
COMBINED MEDICAL SERVICES EXAMINATION, 2017
last date; 19.5.2017
FOR DETAILS CLICK;http://govtrectt.blogspot.in/2017/04/710-posts-upsc-combined-medical.html

4982 POSTS, GRAMIN DAK SEVAK,
WEST BENGAL POSTAL CIRCLE JOBS
last date 24.5.2017
FOR DETAILS CLICK;http://govtrectt.blogspot.in/2017/04/4982-posts-gramin-dak-sevak-west-bengal.html

66 POSTS, RECRUITMENT OF
PROBATIONARY ENGINEERS 2017 ,
BEL JOBS
last date ; 11.5.2017.
FOR DETAILS CLICK;http://govtrectt.blogspot.in/2017/04/66-posts-recruitment-of-probationary.html

119 POSTS, LECTURERS,
ODISHA PSC JOBS
LAST DATE; 8.6.2017
FOR DEILS CLICKhttp://govtrectt.blogspot.in/2017/04/119-posts-lecturers-odisha-psc-jobs.html

INDIAN NAVY JOBS,
RECRUITMENT OF UNMARRIED MALE
CANDIDATES FOR ENROLLMENT AS
SAILORS FOR MR (MUSICIAN)- 02/2017
last date; 19.5.2017
FOR DETAILS CLICK;http://govtrectt.blogspot.in/2017/04/indian-navy-jobsrecruitment-of.html

199 POSTS, Maharashtra
Engineering Services Preliminary
Examination 2017
last date; 10.5.2017
FOR DETAILS CLICK;http://govtrectt.blogspot.in/2017/04/199-posts-maharashtra-engineering.html

259 POSTS, FOREST GUARD,
GOVT ., OF WEST BENGAL
JOBS
last date; 19.5.2017
FOR DETAILS CLICK;http://govtrectt.blogspot.in/2017/04/259-posts-forest-guard-govt-of-west.html


174 POSTS, Soil Conservation
Extension Worker,
ODISHA SSC JOBS
last date 24.5.2017
FOR DETAILS CLICK;http://govtrectt.blogspot.in/2017/04/174-posts-soil-conservation-extension.html

1500 posts,
Assistant Lineman, Punjab
State Power Corporation
Ltd Jobs
last date; 8.5.2017
FOR DETAILS CLICK;http://govtrectt.blogspot.in/2017/04/1500-posts-assistant-lineman-punjab.html

74 POSTS, Jr. Engineering Assistant, Jr. Materials Assistant & Junior Quality Control Analyst ,IOCL JOBS

INDIAN OIL CORPORATION LIMITED (Refineries Division) 
HALDIA REFINERY Advertisement No. PH/R/01/2017 

Requirement of Experienced Non-Executive Personnel Indian Oil Corporation Limited, the largest commercial undertaking in India and a Fortune “ Global 500” company requires result oriented experienced personnel with initiative and enterprise for it’s Haldia Refinery. 

Online Applications are invited from bright, young and energetic persons of Indian Nationality for the following posts in the pay scale of Rs.11,900-32,000/- 

NAME OF THE POST , LIKELY NO. OF VACANCIES

1. Jr. Engineering Assistant IV (Production) Chemical---  30 POSTS

2. Jr. Engineering Assistant IV (Power & Utilities) Electrical / Mechanical  9 POSTS

3 - Jr. Engineering AssistantIV (Electrical) Electrical  6 POSTS

4. Jr. Engineering Assistant IV (Mechanical) Mechanical  15 POSTS

 5. Jr. Engineering Assistant IV (Instrumentation) Instrumentation  3 POSTS

6. . Engineering Assistant IV (Fire & Safety) Fire & Safety 3 POSTS

7. Jr. Materials Assistant-IV Electrical / Mechanical/ Instrumentation  4 POSTS

8.  Jr. Quality Control Analyst-IV Quality Control  4 POSTS


On-line registration of application commences from 29.04.2017 and closes on 19.05.2017. 

 The written test is likely to be held on 02.07.2017 

Only online mode of applications will be accepted.  After successfully applying/registering on-line applications, the candidates must take a printout of the filled in on-line application form. 

The print out along with all supporting documents as mentioned in the checklist attached to the application form including demand draft (if applicable) with name, address, post code and Application No. written on the reverse of the DD is required to be sent by ordinary post to Chief  Human Resource Manager, Indian Oil Corporation Limited, Haldia Refinery, P.O.: Haldia Oil Refinery, Dist.: Purba Medinipur, West Bengal, Pin Code-721 606.Online applications whose printouts are not received OR received after last date 29.05.2017 shall be treated as “ Rejected” 


FOR DETAILS CLICK;https://www.iocl.com/download/AdvertisementHaldiaRefPHR012017.PDF

1148 posts, Personal Clerk/ Steno-Typist/ Assistant/ Commissioner,TN PSC Jobs

1148 posts, Personal Clerk/ Steno-Typist/ Assistant/ Commissioner,TN PSC Jobs

Applications are invited only through online mode from applicants upto 26.05.2017 for direct
recruitment against the vacancies in the following posts included in;

 Combined Civil
Services Examination–II (2017-2018)

 (Non-Interview Posts) (Group-II A Services) [Service
Code No.004].

Personal Clerk/ Steno-Typist/ Assistant/ Commissioner Job Position in Tamil Nadu Public Service Commission (TNPSC) for direct recruitment against the vacancies in the following posts included in Combined Civil Services Examination–II (2017-2018) (Non-Interview Posts) (Group-II A Services) [Service Code No.004].

Tamil Nadu Public Service Commission (TNPSC) recruiting 1148 Vacancies for various posts

Total No. of Vacancies : 1148

Last date 26.5.2017

FOR DETAILS CLICK;http://www.tnpsc.gov.in/latest-notification.html

710 POSTS, UPSC / COMBINED MEDICAL SERVICES EXAMINATION, 2017

UPSC / COMBINED MEDICAL SERVICES EXAMINATION, 2017

Post  : Combined Medical Services Examination, 2017
 Vacancy : 710 Posts

 Qualification : Candidate should have passed the written and practical parts of the final M.B.B.S. Examination.
Nationality : Indian
Age Limit : Maximum age limit is 32 years as on 01.08.2017
Age Relaxation : For OBC Candidates 3 years, For SC/ST Candidates 5 years & For PH Candidates 10 years

 Candidates to ensure their eligibility for the examination: The candidates applying for the examination should ensure that they fulfil all eligibility conditions for admission to the Examination. Their admission at all the stages of the examination will be purely provisional subject to satisfying the prescribed eligibility conditions. Mere issue of e-Admit Card to the candidate will not imply that his candidature has been finally cleared by the Commission. Verification of eligibility conditions with reference to original documents is taken up only after the candidate has qualified for Interview/Personality Test.

  How to Apply Candidates are required to apply online by using the website www.upsconline.nic.in Brief instructions for filling up the online Application Form have been given in the Appendix-II. Detailed instructions are available on the above mentioned website.

 Last Date for submission of Applications: The online Applications can be filled upto 19th May, 2017 till 6.00 P.M.

The eligible candidates shall be issued an e-Admit Card three weeks before the commencement of the examination. The e-Admit Card will be made available in the UPSC website [www.upsc.gov.in] for downloading by candidates. No Admit Card will be sent by post. All the applicants are required to provide valid and active E-mail i.d. while filling up Online Application form as the Commission may use electronic mode for contacting them.

Penalty for wrong answers: Candidates should note that there will be penalty (Negative Marking) for wrong answers marked by a candidate in the Objective Type Question Papers.

 The written examination for Combined Medical Service for two objective papers will be conducted in Computer based mode. A demo module for Computer based mode of this examination will be available on UPSC website www.upsc.gov.in at the time of the launching of e-Admit Card. “Government strives to have a workforce which reflects gender balance and women candidates are encouraged to apply.”

Last date for submission of applications: 19.05.2017.

FOR DETAILS CLICK;http://www.upsc.gov.in/sites/default/files/CMS_17_Notice_English.pdf 

17 posts, UPSC RECRUITMENT

ADVERTISEMENT NO. 08/2017
 UNION PUBLIC SERVICE COMMISSION INVITES ONLINE RECRUITMENT


 1. (Vacancy No. 17040801622) Four Foreman (Chemical), Directorate General of Aeronautical Quality Assurance, Department of Defence Production, Ministry of Defence (OBC-02, UR-02). 

2. (Vacancy No. 17040802622) One Foreman (Electronics), Directorate General of Aeronautical Quality Assurance, Department of Defence Production, Ministry of Defence (SC-01). 

 3. (Vacancy No. 17040803622) Four Foreman (Mechanical), Directorate General of Aeronautical Quality Assurance, Department of Defence Production, Ministry of Defence (ST-01, OBC-01, UR-02). 

 4. (Vacancy No. 17040804422) Three Technical Officer (Forestry) Gr.II, Ministry of Environment, Forest and Climate Change (OBC-01, UR-02). 

5. (Vacancy No. 17040805422) One Assistant Registrar General (Language), Office of the Registrar General, India, Ministry of Home Affairs (UR-01). 

6. (Vacancy No. 17040806422) One Research Officer/Planning Officer, Directorate General of Employment, Ministry of Labour & Employment (UR-01). 

 7. (Vacancy No. 17040807622) Three Deputy Controller of Mines, Indian Bureau of Mines, Ministry of Mines (OBC-01, UR-02). 


IMPORTANT CLOSING DATE FOR SUBMISSION OF ONLINE RECRUITMENT APPLICATION (ORA) THROUGH ORA WEBSITE IS 23:59 HRS ON 11.05.2017. THE LAST DATE FOR PRINTING OF COMPLETELY SUBMITTED ONLINE APPLICATION IS UPTO 23:59 HRS ON 12.05.2017. 

FOR DETAILS CLICK;http://www.upsc.gov.in/sites/default/files/Advt_08-17_Emp_ORA_Engl_0.pdf

4982 POSTS, GRAMIN DAK SEVAK, WEST BENGAL POSTAL CIRCLE JOBS

INDIA POST JOBS, West Bengal Postal Circle Recruitment;

Post : Gramin Dak Sevaks
Vacancy : 4982 vacancies

Break up of posts;

UR : 2561 Posts
OBC : 1224 Posts
SC : 945 Posts
ST : 252 Posts


Qualification : Candidate should pass 10th standard from approved state boards by the respective State Govt. / Central Govt.

Age Limit :
18 to 40 years as on 24.05.2017.

Starting Date for Submission Of Online Application : 25.4.2017
Last Date for Submission Of Online Application : 24.5.2017


FOR DETAILS CLICK;http://www.appost.in/gdsonline/